Agiseek home

Milk Line Parts Milking Equipment For Sale In Eugene

Become a Partner
Short Ferrule (Thread/Weld)--3\
Prices start at : 21.92 USD / each

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other. Ferrule for 3" OD tube is 29/32" long.
  • Weight: 0.25 lbs
Oregon
Eugene
Short Ferrule (Clamp/Weld)--3\
Prices start at : 12.56 USD / each

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 3" OD tube is 1/2" long with 2.834" ID.
  • Weight: 0.25 lbs
Oregon
Eugene
Special Y (Weld/Weld/Weld)--3\
Prices start at : 143.71 USD / each

Butt-Weld-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10". Type 304 Stainless Steel.
  • Weight: 0.75 lbs
Oregon
Eugene
Long Ferrule (Clamp/Weld)--4\
Prices start at : 24.24 USD / each

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 4" OD Tube.
  • Weight: 0.13 lbs
Oregon
Eugene
180-Degree U-Bend (Clamp/Clamp)--2\
Prices start at : 98.85 USD / each

180 Degree clamp-end U-bend for 2" tube OD features "A" dimension of 6". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
Oregon
Eugene
90-Degree Sweep Ell (Weld/Clamp)--2.5\
Prices start at : 80.10 USD / each

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 2.5" OD tube features "A" dimension of 5-3/16" and "B" dimension of 5-11/16”.
  • Weight: 0.5 lbs
Oregon
Eugene
4\
Prices start at : 9.00 USD / each

Teflon Tri-Clamp Gasket.
  • Weight: 1 lbs
Oregon
Eugene
Concentric Reducer (Weld/Weld)--4\
Prices start at : 83.93 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.Reducer from 4" OD to 2.5" OD tube is 6" long.
  • Weight: 0.5 lbs
Oregon
Eugene
Solid End Cap f/Bevel Seat--1.5\
Prices start at : 10.64 USD / each

Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 1.5" OD tube has 1.84" OD.
  • Weight: 0.19 lbs
Oregon
Eugene
3.0`` U-Bend (Clamp/Clamp)
Prices start at : 199.47 USD / each

3" size with a clamp-type connection at each end. J-Bends for moisture traps are available in 2" ferrule/thread, 3" ferrule/thread, 2" clamp/clamp, and 3" clamp/clamp. U-Bends are also available in 3" weld/weld and 4" clamp/clamp.
  • Weight: 1 lbs
Oregon
Eugene
12 Qt. Moisture Trap w/ 2 3`` Threaded Inlets
Prices start at : 421.62 USD / each

Stainless steel Moisture Trap comes complete with trap body, cover, cover gasket, 3.5" diameter ball and cover clip. Trap has two 3" threaded inlets.
  • Weight: 3 lbs
Oregon
Eugene
Concentric Reducer (Clamp/Clamp)--1.5\
Prices start at : 46.42 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 1.5" OD to 1".
  • Weight: 0.5 lbs
Oregon
Eugene
180-Degree U-Bend (Weld/Weld)--3\
Prices start at : 136.58 USD / each

180 Degree butt-weld U-bend for 3" tube OD features "A" dimension of 9". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
Oregon
Eugene
7/8\
Prices start at : 19.68 USD / each

Electropolished, Stainless Steel strap-on pipe nipple fits 1-1/2” to 3” pipe and is ideal for wash lines. For 3/4” ID milk hose.
  • Weight: 0.25 lbs
Oregon
Eugene
2-1/2\
Prices start at : 1.05 USD / each

Rubber tri-clamp gasket for 2.5" OD tubing.
  • Weight: 1 lbs
Oregon
Eugene
Type 304 Kleen Flo Butterfly Valve 2.5\
Prices start at : 190.00 USD / each

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.
  • Weight: 3 lbs
Oregon
Eugene
Special Y (Clamp/Clamp/Clamp)--3\
Prices start at : 212.62 USD / each

Clamp-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10". Type 304 Stainless Steel.
  • Weight: 0.75 lbs
Oregon
Eugene
180-Degree U-Bend (Weld/Weld)--1.5\
Prices start at : 62.00 USD / each

180 Degree butt-weld U-bend for 1.5" tube OD features "A" dimension of 4-1/2". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
Oregon
Eugene
Solid State Liquid Level Control w/o Probe
Prices start at : 306.65 USD / each

Moisture-proof water-resistant Solid State Liquid Level Control not including probe.
  • Weight: 5 lbs
Oregon
Eugene
Floor Mount Receiver Group w/ Vertical Pump
Prices start at : 4112.23 USD / each

In addition to the superior Washguard tm motor, this receiver group has: 18 x 18 Jar with two 3” inlets, one 1.5” outlet and 3” Vacuum Connection Heavy Duty Stainless Steel Jar Support, Motor Platform 12 Quart Stainless Steel Moisture Trap & J-Bend...
  • Weight: 140 lbs
Oregon
Eugene
Special Y (Weld/Weld/Weld)--1.5\
Prices start at : 75.53 USD / each

Butt-Weld-end Special Y for 1.5" tube OD features "A" dimension of 2-3/4" and "B" dimension of 5-1/2". Type 304 Stainless Steel.
  • Weight: 0.75 lbs
Oregon
Eugene
45-Degree Elbow (Clamp/Clamp)--2.5\
Prices start at : 48.83 USD / each

45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2.5" OD tube features "C" dimension of 2-1/16".
  • Weight: 0.5 lbs
Oregon
Eugene
Type 316 Butterfly Valve (Clamp/Clamp)--2.5\
Prices start at : 182.21 USD / each

This high-quality butterfly valve for 2.5" tube is made of type 316 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.
  • Weight: 3 lbs
Oregon
Eugene
Seal Kit f/BouMatic Milk Pump
Prices start at : 31.54 USD / each

Seal Kit f/BouMatic Milk Pump
  • Weight: 0.25 lbs
Oregon
Eugene
Solid End Cap f/Bevel Seat--4\
Prices start at : 66.88 USD / each

Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 4" OD tube has 4.5" OD.
  • Weight: 0.19 lbs
Oregon
Eugene
Solid End Cap f/Bevel Seat--2\
Prices start at : 21.28 USD / each

Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 2" OD tube has 2.38" OD.
  • Weight: 0.19 lbs
Oregon
Eugene
Long Ferrule (Clamp/Weld)--1\
Prices start at : 8.66 USD / each

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 1" OD Tube.
  • Weight: 0.13 lbs
Oregon
Eugene