Agiseek home

Milk Line Fitting Connectors Milking Equipment For Sale In District Of Columbia

Become a Partner
45-Degree Elbow (Clamp/Clamp)--2.5\
Prices start at : 48.83 USD / each

45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2.5" OD tube features "C" dimension of 2-1/16".
  • Weight: 0.5 lbs
District of Columbia
Glass to Stainless Roll-On Ferrule--1.5\
Prices start at : 19.92 USD / each

Glass-to-Stainless Steel Ferrule with Gasket Groove is made of Type 304 Stainless Steel with #4 Dairy Finish. 3/4" long for 1.5" OD tube.
  • Weight: 0.25 lbs
District of Columbia
90-Degree Sweep Ell (Weld/Clamp)--4\
Prices start at : 168.65 USD / each

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 4" OD tube features "A" dimension of 8-5/16" and "B" dimension of 8-15/16".
  • Weight: 0.5 lbs
District of Columbia
Short Ferrule (Thread/Weld)--1.5\
Prices start at : 10.08 USD / each

Ferrule for 2" OD tube is 23/32" long. Ferrule for 2.5" OD tube is 27/32" long. Ferrule for 3" OD tube is 29/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.
  • Weight: 0.25 lbs
District of Columbia
Thread Bevel-Seat Recessless Roll-On Ferrule--3\
Prices start at : 32.55 USD / each

Bevel-seat recessless ferrule for 3" tubing is 1-5/8" long.
  • Weight: 0.19 lbs
District of Columbia
Hex Union Nut--4\
Prices start at : 50.76 USD / each

Hexagonal Union Nut is made of type 304 Stainless Steel with #4 Dairy Finish. 4" Tube OD style features "A" dimension of 4-7/16" and "B" dimension of 1-1/2"
  • Weight: 0.13 lbs
District of Columbia
Solid End Cap f/Tri-Clover--2\
Prices start at : 7.00 USD / each

Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 2" OD tube has 2.52" OD.
  • Weight: 0.25 lbs
District of Columbia
Concentric Reducer (Clamp/Clamp)--4\
Prices start at : 143.58 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 4" OD to 2" OD tube is 9-1/8" long.
  • Weight: 0.5 lbs
District of Columbia
Solid End Cap f/Tri-Clover--1.5\
Prices start at : 5.25 USD / each

Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 1.5" OD tube has 1.98" OD.
  • Weight: 0.25 lbs
District of Columbia
90-Degree Sweep Ell (Weld/Clamp)--1.5\
Prices start at : 42.08 USD / each

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 1.5" OD tube features "A" dimension of 2-15/16" and "B" dimensionof 3-7/16".
  • Weight: 0.5 lbs
District of Columbia
90-Degree Sweep Ell (Weld/Clamp)--2\
Prices start at : 51.62 USD / each

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 2" OD tube features "A" dimension of 4-1/16" and "B" dimension of 4-9/16”.
  • Weight: 0.5 lbs
District of Columbia
Tee (Clamp/Clamp/Clamp)-2\
Prices start at : 64.64 USD / each

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".
  • Weight: 0.38 lbs
District of Columbia
180-Degree U-Bend (Clamp/Clamp)--1.5\
Prices start at : 82.65 USD / each

180 Degree clamp-end U-bend for 1.5" tube OD features "A" dimension of 4-1/2". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
District of Columbia
Type 316 Butterfly Valve (Weld/Weld)--4\
Prices start at : 283.25 USD / each

This high-quality butterfly valve for 4" tube is made of type 316 Stainless Steel for butt weld connection. Not recommended for applications where pressure exceeds 150 psi.
  • Weight: 3 lbs
District of Columbia
Concentric Reducer (Weld/Weld)--4\
Prices start at : 53.48 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 4" OD to 3" OD tube is 4" long.
  • Weight: 0.5 lbs
District of Columbia
Special Y (Clamp/Clamp/Clamp)--2.5\
Prices start at : 169.54 USD / each

Clamp-end Special Y for 2.5" tube OD features "A" dimension of 4-1/4" and "B" dimension of 8-1/2". Type 304 Stainless Steel.
  • Weight: 0.75 lbs
District of Columbia
90-Degree Bend (Weld/Weld)--2\
Prices start at : 27.68 USD / each

90 Degree tube bend for 2" tube OD features "A" dimension of 4-1/16". Type 304 Stainless Steel.
  • Weight: 0.5 lbs
District of Columbia
Thread Bevel-Seat Recessless Roll-On Ferrule--2.5\
Prices start at : 28.00 USD / each

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-1/2" long.
  • Weight: 0.19 lbs
District of Columbia
Bevel-Seat Recessless Roll-On Ferrule--1.5\
Prices start at : 12.00 USD / each

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.
  • Weight: 0.19 lbs
District of Columbia
Long Ferrule (Clamp/Weld)--2.5\
Prices start at : 12.80 USD / each

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2.5" OD Tube.
  • Weight: 0.13 lbs
District of Columbia
Bevel-Seat Ferrule (Bevel/Weld)--2.5\
Prices start at : 10.32 USD / each

Butt weld bevel-seat ferrule for 2-1/2" tubing is 27/32" long and B-dimension of 2-29/32" and C-dimension of 2-23/64".
  • Weight: 0.19 lbs
District of Columbia
90-Degree Elbow (Clamp/Clamp)--3\
Prices start at : 74.79 USD / each

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5".
  • Weight: 0.5 lbs
District of Columbia
6\
Prices start at : 12.96 USD / each

Stainless Steel Wall Flange for 1.5" is also available for 2", 2.5", 3" and 4" tubing. Flange is 6" in diameter.
  • Weight: 0.38 lbs
District of Columbia
180-Degree U-Bend (Clamp/Clamp)--2.5\
Prices start at : 141.45 USD / each

180 Degree clamp-end U-bend for 2.5" tube OD features "A" dimension of 7-1/2". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
District of Columbia
Bevel-Seat Ferrule (Bevel/Weld)--4\
Prices start at : 17.60 USD / each

Butt weld bevel-seat ferrule for 4" tubing.
  • Weight: 0.19 lbs
District of Columbia
Plain Recessless Ferrule--3\
Prices start at : 22.64 USD / each

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-7/16" long for 3" OD tube.
  • Weight: 0.25 lbs
District of Columbia
90-Degree Elbow (Clamp/Clamp)--1\
Prices start at : 18.22 USD / each

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 1" OD tube features inner radius of 1.5" and center distance (C) of 2".
  • Weight: 0.5 lbs
District of Columbia