Machinery Equipment For Sale In Charlotte

RAPID 2442RS GRANULATOR Used 24" x 42" Granulator 100 HP Motor (20) Rotating Knives (3) fixed Bed Knives Pneumatic Hopper Tilt Pneumatic Cradle Tilt Dual Fly Wheel 8" Discharge Mounted On Casters Emergency Stop Dimensions; 74" L x 68"W x 100"H Loaded...

Abrasive Planer, Top & Bottom 1,300 mm (52") working width capacity. Feed System : ●& AP-010394 Head Configuration : ● (2) Heads, (1) top and (1) bottom head directly opposed. ELMAG 505/2 ...

Arbor; 1 HP scoring motor with 3/" dia. Arbor; tilting arbor from 0° - 45°; 126" table stroke w/table lock mechanism. With movable fence, 300 mm (11.8") main saw blade dia., 100 mm (3.9") scoring blade dia., max.

Arbor, 8" - 12" max. 1 HP feed motor with (3) feed speeds to feed chain with automatic chain lubrication. Top pressure system with (6) spring loaded ho RS-011197 Part length 17-3/4" distance between saw & column, 50" long x 30" wide table.

SPECIFICATIONS: 5 HP Feed motor with variable feed speed, 30 - 90 FPM Upper feed mat with round pin type spring loaded holddown fingers Gravity oiler PD-010664 Stock length (12" butt fed), 50 HP top & 40 HP bottom direct drive motors at 3,600 RPM, Carbide...

Specifications: Mi WM-010384 Enables automatic pneumatic positioning of the workpiece and features (2) saw units which are at an angle of 45° thereby cutting both glazing beads on both sides in a single working cycle.

2006 CEFLA ECOSPRAYER ROC 3D Automatic Spray Machine; CEFLA "ECOSPRAY ROC 3", 51" Width capacity. Features: CNC gun height adjustment; (2) finish material circuits, (2) belt driven reciprocating trolley carries (2) CEFLA adjustable 8-gun, each mounts...

This is a demonstrator machine with only 4 hours on the meter ! Head Sequence: Bottom 4 kW (5.5 HP), right & left 4 kW (5.5 HP), top 5.5 kW (7.5 HP), top 11 kW (15HP), bottom 4 kW (5.5 HP) motor.

The Clamp is activated once again to complete the box assembly. The operator loads a drawer front & pair of sides into the clamp, activates the clamping head with push button control; the jaws retract and the drawer bottom & back are installed.

Cutting length 215 mm, max. Crosscut at 45° is 93 mm ; inward or way from each other with positive stops at 45°, 90° & 45°. OMGA TR-2-A Double Miter Saw Specifications: (2) Saw heads, (2) 1.6 kW - 3,450 RPM motor ea., 300 mm dia.

Mechanical readouts for pressure elements and chip breakers. Mechanical spindle brakes. Minimum wo MF-013265 1.5" with cutterhead speed of 6,000 RPM. Head sequence: Bottom 10 HP, right 7.5 HP, left 7.5 HP, top 15 HP and bottom 10 HP motor.

HOMAG BAZ 722 58/13/KC "GANTRY" CNC MACHINING CENTER (W/EDGEBANDING) + BARGSTEDT TBP 370/26/16 material handling system: Specifications: Working field (single panel); "X" Axis 5,860 mm (230"), "Y" axis 1,525 mm (60"), "Z" axis 300 mm (11.8"), max work...

Specifications: Maximum Load Size: Maximum load size 56" L x 56" MH-280280 All Wulftec structures are made of heavy-duty steel for rugged performance, even in the harshest work environments.

Northtech NT-610EL Top & Bottom Planer Capacities : 24" wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length Cutterheads : 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide...

Specifications: Flexible "Vertical" Machining Center that uses less than 5 meter² of valuable floor space in addition to an innovative panel handling system. Worktable part size for "X" axis is 7.8" (20 BP-012502

2nd Head: Rubber covered contact roll 12-1/2" dia. Solid wood and thick veneer sander. 1st Head: Rubber covered contact roll 9-1/2" (240 mm) dia. PLC proce SX-012246 (30-shore), 15 HP motor 46 FPS (14 MPS).

Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. All spindles with mechanical MF-013271 305 x 200 mm (12" x 7-7/8"). SCM TOPSET MASTER 30 XL ... Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM .

SELCO EB 70 CNC Front-Load Horizontal Beam CNC Panel Saw 126" (3,200 mm) Overall cutting length, 2.75" cutting height (80 mm saw blade projection). Specifications: 12 HP Main & 3.6 HP scoring motor.

Cutting height 5-11/16", hydraulic saw blade height & tilt adjustment by foot pedal control; cutting width between saw blade and rip fence 49". Complete wit PS-011800 MARTIN T-71 Sliding Table Saw Specifications: 10' Cutting cap., 3-position table locking...

Worktable: (12) Movable support rails with side mounted raise-and-lower panel feeding rails, (2) vacuum pods per ra BP-280503 Position speed: "X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM).

The machine can apply hot melt glue to the back of roll form materials including paper, pvc, and veneer. Slot die laminator with an 800 mm (31 - 1/2") working width for flat panels and shaped edges.

1: - BUTFERING Profiline SUR 213 RR - Bottom 2-Head , 1,350 mm (53") Width Capacity Wide Belt Sander; Pos. Top & Bottom Wide Belt Sanding Line with LIGMATECH Powered Roller Conveyors for In- & Outfeed & Connection between Top & Bottom Sander; consisting...

5 x 10' Hot Press with Auto Load/Unload and Return Conveyor. For pressing High Pressure Laminates (HPL), Backer Sheets, Wood Veneers! Flat-Belt Powered In-feed Layup Conveyor: (Not included) For laminate lay-up and loading of the press, foot pedal operated...

Welded steel bridge and base frame const RL-010698 Equipped with: (1) 10 HP COLOMBOATC spindle variable speed from 3,000 - 24,000 RPM, and 5-position bar style tool rack / tool changer .

HEESEMANN MFA 6 ... Wide Belt Sander with (4) Sanding Heads, (1) Brush Roller and EA 8 Panel Ionization Cleaning Machine 1,350 mm (53") max. Head configuration: (1) Segmented cross belt, (3) longitudinal segmented platen heads, and (1) brush roller.

Equipped with: 15 HP, top mounted, direct drive blower rated at 6,000 CFM. Differential pressure gauge and sequencing timer board in enclosure. Holds (12) AirMax Premium Media Cartridge Filters - fire retardant and with 3,048 sq.