Load King Lowboy Trailers For Sale In New Mexico

1989 Load King 65 Ton Deck Section

HAS 3RD AXLE AIR LIFT. FOLDING MANUAL NECK, GOOD TIRES.

CALL FOR PRICING NEW LOAD KING BOOSTER- PIN ON SINGLE AXLE BOOSTER.

Pin-on 4th Axle on Air Ride. LOAD KING 55-Ton Lowboy, Self Contained w/Honda Power, 2-kingpin settings, 26' well, 8' 6"' wide, 60" axle spacing, air ride, 3rd axle lift, raise & lower valve, LED lights, strobes, flip ramps, Apitong decking, block tray.

3/4" wall axles, 12'-9" Gooseneck w/86" & 110" Swing, 18" Loaded Deck Height, High Relief Gooseneck, 26' Deck, 13 pair chain slots in upper flange, 6 pair bent D-Rings, 30" front flip ramps, tapered beams for low angle at approach, 60" pierced steel plate...

HYD DETACH, 25'X8'X6" DECK, TRI AXLE, W/ AIR LIFT 3RD, ALUM OUTSIDE WHEELS, FRONT FLIP NECK, 20" LOADED DECK HEIGHT, REAR FOURTH FLIP AXLE (NOT SHOWN IN PHOTOS) $99,500 PLUS FET

55 Ton Capacity, 12'9" Gooseneck, 110" & 86" swing clearance, Front flip ramps, 26' Deck, 60" Pierced steel in front deck for chain & binder storage, 10" & 4" cross-members alternating on 12" centers, 13 Pair chain slots in outer flanges, 6 bent D-rings...

GOING TO AUCTION - Hydraulic Detach Neck - Nice Older Low Boy Trailer - 8' Wide - 9' Top Deck (Neck) - 18' Main Deck - 13' Rear Deck - 16,240 GAWR - 84,200 GVWR - Outriggers - D Ring Tie Downs - Wood Deck - Call to Discuss or Schedule an Inspection

NEW LOAD KING FL201 Flip Axle, Air Ride Suspension, 25,000 lbs Axle, 60" axle spacing, 9' Width, (4) 255/70R22.5 tires, (4) 8.25 x 22.5 hub piloted disc wheels, Raise & Lower Valve, LED Lights, Rear Bumper Strobe Lights, Mud flaps.

NEW 2017 LOAD KING 55 TON, IN STOCK, F.E.T. ADDITIONAL, JUST ARRIVING

13 ft deck over wheels with excavator cut out

Model: PHD 70/90-2

9' WIDE, CANTI LEVER, QUAD AXLE, AIR LIFT FOURTH AXLE9' WIDE, CANTLE LEVER, QUAD AXLE, AIR LIFT FOURTH AXLE

2 available...Irving, TX and Houston, TX. 26ft well, upper flange reinforcement, wide load package, pony motor...can use truck hydraulics as well. Spreader bar and flip axle compatible.

25'X8'6" DECK, 10' AXLE SPACING, ALUMINUM OUTSIDE WHEELS, HEAVY DUTY PULL OUT, 13' GOOSE NECK, 4TH AXLE READY, ENCLOSED BOTTOM TROUGH

Load King 52', Hydraulic detach, Tri-axle with third axle lift,12' low-profile scraper style neck, 26' main deck, 12'6" bridge with open wheels, 10" cross members, 16" main I-beams, 13 removable heavy duty swing out outriggers on 24" centers, flag holders,...

***Available in December 2018*** Model: 554 SSF QUAD Pony Motor, 26ft deck, upper flange reinforcement, wide load package, air lift 1st and 4th axles, Flip axle and Spreader Bar compatible.

Deck, 55" axle spacings, 255/70R22.5 Tres 65%, ramps, Steel Rims, put through shop, fresh Idaho DOT Mechanical detach neck, 23 ft x 8 ft 6 in. C/w A/R susp, 9 ft 6 in.

2011 Load King hydraulic upper ramp/beavertail trailer

Load King Signature 55 SF Lowboy, Low Profile Scraper Style 112" & 102" Swing clearance, non-ground bearing detachable gooseneck, 51" 5th wheel height, 13" gooseneck, 26' deck, 24" deck height with 8" clearance, 3 25K capacity axles, 30" flip ramps, wide...

37" bracket centers Built with the downward pitch so you can run tall or shorter tires on 1 end (or less shim with same size) and no it isn't bent lol. Good shape and low miles. Front pins included.

55 Ton Extendable, steel wheels with air ride. 2016 Loadking lowboy.

3/4" wall axles, 12'-9" Gooseneck w/86" & 110" Swing, 18" Loaded Deck Height, High Relief Gooseneck, 26' Deck, 13 pair chain slots in upper flange, 6 pair bent D-Rings, 30" front flip ramps, tapered beams for low angle at approach, 60" pierced steel plate...

25 TON, GOOD LOWER FLOOR, SPOKE WHEELS, GOOD TIRES, REAR RAMPS, WORKING TRAILER

New fourth axle flip axle for 55-60 ton loadking lowboy.

Pin on mechanical air booster w/ shims.