Load King Lowboy Trailers For Sale In Boston

1989 Load King 65 Ton Deck Section

12'-9" Gooseneck w/86" & 110" Swing, 18" Loaded Deck Height, High Relief Gooseneck, 26' Deck, 13 pair chain slots in upper flange, 6 pair bent D-Rings, 30" front flip ramps, tapered beams for low angle at approach, 60" pierced steel plate at front of...

37" bracket centers Good shape and low miles. 2013 Load king single axle spreader bar. Built with the downward pitch so you can run tall or shorter tires on 1 end (or less shim with same size) and no it isn't bent lol.

25 TON, GOOD LOWER FLOOR, SPOKE WHEELS, GOOD TIRES, REAR RAMPS, WORKING TRAILER

HYD DETACH, 25'X8'X6" DECK, TRI AXLE, W/ AIR LIFT 3RD, ALUMINUM OUTSIDE WHEELS, FLIP NECK, FLIP FOURTH AXLE, 20" LOADED DECK HEIGHT, CALL FOR COMPLETE SPECS Model: 60 TON

Needs a floor, paint, and one lift cylinder repacked. Good solid Florida trailer.

NEW LOAD KING BOOSTER- PIN ON SINGLE AXLE BOOSTER. CALL FOR PRICING

2007 Load King FL201 Flip axle with Spreader Bar. Fresh Paint and DOT Inspection.

1982 LOAD KING 50 TON TRI/A LOWBOY, BEAM SUSP, FOLDING WIDE NECK, 8' X 20' DECK, OUTRIGGERS, POWER UNIT, NON-GROUND BEARING, 10' AXLE SPREAD, BEAVER TAIL, 3 KING PIN SETTINGS, S/N: 12063

2017 LOADKING 55 TON LDH SERIERES. 18" LOW DECK HEIGHT, 12FT 9 INCH GOOSENECK WITH 26FT MAIN DECK 60" AXLE SPACING 110" AND 86" SWING CLEARANCE 30 INCH FRONT FLIP RAMPS, AIR LIFT 3RD AXLE 2RD TAIL LIGHT PACKAGE WITH STROBE MULTIPLE HEIGHT CONTROL ON LEVLING...

2011 Load King hydraulic upper ramp/beavertail trailer

LOW DECK HEIGHT "18 INCH", 26 FT FLUSH DECK, WETKIT, ALUMINUM WHEELS, PLUMBED FOR OPTIONAL 4TH AXLE, AIR LIFT THIRD AXLE, BOOM TROUGH, FRONT AND REAR ADJUSTABLE RIDE HEIGHT, HONDA POWER PACK, APITONG DECK, TAPERED GOOSENECK, LOADED WITH CHAIN SLOTS AND...

48' x 96" to 128", 24' in well, Mechanical Detach, Non Ground Bearing, 70% Tires, 60% Brakes, 70% Drums, 24" Deck Height, Height Control Valve on Rear, 26 D-rings, 18" Pull Outs, 22 Out Riggers, Very Nice for age, No Rust, No Bends.

Located in Irving, TX. 26ft deck, wide load package, upper flange reinforcement, load bearing wheel covers, aluminum outside wheels, pony motor, spreader bar and flip axle compatible.

Fenders are rusted through. Detach pins have some wear and has been welded. Detach, Outriggers, Composite Deck, Air Suspension. Brakes are worn and drums are worn and grooved. Right Beam at rear has a crack.

20' well, tie down, outriggers, good floor, fair to good rubber, work ready, ,mechanical fold.

9' WIDE, CANTI LEVER, QUAD AXLE, AIR LIFT FOURTH AXLE9' WIDE, CANTLE LEVER, QUAD AXLE, AIR LIFT FOURTH AXLE

LOAD KING 55-Ton Lowboy, Self Contained w/Honda Power, 2-kingpin settings, 26' well, 8' 6"' wide, 60" axle spacing, air ride, 3rd axle lift, raise & lower valve, LED lights, strobes, flip ramps, Apitong decking, block tray.

NEW 2017 LOAD KING 55S LDH, LOW DECK HEIGHT SERIES, 18" LOAD HEIGHT, 26FT FLUSH DECK, WET KIT, AIR LIFT 3RD AXLE, STEEL WHEELS, PLUMBED FOR OPTIONAL 4TH AXLE, $69,500.00 PLUS TAXES

Load King 52', Hydraulic detach, Tri-axle with third axle lift,12' low-profile scraper style neck, 26' main deck, 12'6" bridge with open wheels, 10" cross members, 16" main I-beams, 13 removable heavy duty swing out outriggers on 24" centers, flag holders,...

Load King LK55, Hydraulic Detach, 26' Deck Length, 13' Gooseneck, Manual Raise Lower, 12 Pair Outriggers, Spreader Capable, Front Flip Ramps, 3rd Lift Axle, Swing Out Outriggers, 55 Ton Rating

Stinger is 8 ft, air ride, Jeep, shop built. No telling what a new one like this costs, probably 140-150. 65 ton Load King non-ground bearing, air ride detach with four axles plus stinger, 3rd axle lifts and 4th axle is removable, excellent 22.5 rubber,...

12'9" Low Profile Scraper Neck with connections for extendable flip box, 26' deck, 13 pair of full depth swinging outriggers, wide load package, multiple ride height adjustment, compatible with spreader bar and up to (2) additional flip axles, air lift...

12'-9" Gooseneck w/86" & 110" Swing, 18" Loaded Deck Height, High Relief Gooseneck, 26' Deck, 13 pair chain slots in upper flange, 6 pair bent D-Rings, 30" front flip ramps, tapered beams for low angle at approach, 60" pierced steel plate at front of...