Load King Lowboy Trailers For Sale In Alaska

1993 TROGAN, 10’ 6” X 27” EXTENDABLE WELL, 9’ Neck, 7’6” rear deck, 22.5 LOW PROS ON T/A AIR RIDE Model: TROMBONE 10’6” WIDE DOUBLE DROP

NEW DECALS, FLAPS, ETC, CALL FOR MORE INFORMATION. 1986 LOAD KING 50 TON DSR, AIR RIDE, 25' DEKC, 102" WIDE, NGB GOOSENECK, COMPLETELY RECONDITIONED, ONE OWNER, SANDBLASTED, PAINTED, NEW DECKING, NEW BRAKES, SEALS, BEARINGS, BRAKES, HUBCAPS, SHOCKS, AIR...

60 ton 3 axle drop side Lowboy trailer with a non ground bearing hydraulic detachable neck and a 4th flip axle

25'X8'6" DECK, 10' AXLE SPACING, ALUMINUM OUTSIDE WHEELS, HEAVY DUTY PULL OUT, 13' GOOSE NECK, 4TH AXLE READY, ENCLOSED BOTTOM TROUGH

55 Ton Extendable, steel wheels with air ride. 2016 Loadking lowboy.

13 ft deck over wheels with excavator cut out

HYD DETACH, 25'X8'X6" DECK, TRI AXLE, W/ AIR LIFT 3RD, ALUMINUM OUTSIDE WHEELS, FLIP NECK, FLIP FOURTH AXLE, 20" LOADED DECK HEIGHT, CALL FOR COMPLETE SPECS Model: 60 TON

25'X8'6" DECK, 10' AXLE SPACING, ALUMINUM OUTSIDE WHEELS, HEAVY DUTY PULL OUT, 13' GOOSE NECK, 4TH AXLE READY, ENCLOSED BOTTOM TROUGH

12'-9" Scraper Style High Relief Gooseneck, Multiple position ride height, 26' Deck, 31" Double Hinged Front Flip Ramps, 24" Loaded Deck Height, 2" Apitong Decking secured with Carriage bolts & Clips, Pierced Steel Plate between Main Beams in Front 60"...

Very, very low mile unit. 2010 Load King single axle booster in excellent shape tires and brakes are 85-90% set for 14'1" spacing.

CALL FOR PRICING NEW LOAD KING BOOSTER- PIN ON SINGLE AXLE BOOSTER.

2011 Load King hydraulic upper ramp/beavertail trailer

Mechanical detach neck, 23 ft x 8 ft 6 in. Deck, 55" axle spacings, 255/70R22.5 Tres 65%, ramps, Steel Rims, put through shop, fresh Idaho DOT C/w A/R susp, 9 ft 6 in.

55 Ton Capacity, 12'9" Gooseneck, 110" & 86" swing clearance, Front flip ramps, 26' Deck, 60" Pierced steel in front deck for chain & binder storage, 10" & 4" cross-members alternating on 12" centers, 13 Pair chain slots in outer flanges, 6 bent D-rings...

3/4" wall axles, 12'-9" Gooseneck w/86" & 110" Swing, 18" Loaded Deck Height, High Relief Gooseneck, 26' Deck, 13 pair chain slots in upper flange, 6 pair bent D-Rings, 30" front flip ramps, tapered beams for low angle at approach, 60" pierced steel plate...

SINGNATURE 55F 55 TON LOWBOY

WHEELS, PLUMBED FOR OPTIONAL 4TH AXLE, AIR LIFT THIRD AXLE CALL FOR PRICING Model: 55 LDH SIGNATURE 55F LDH LOWBOY LOW DECK HEIGHT "18 INCH", 25 FT FLUSH DECK, WETKIT, OUTSIDE ALLUM.

Trailer is set up to accept a flip axle. 2018 Load King 503/504 DFP Power Folding Neck, Knife Edge on front of neck, Air lift 3rd axle, strobe lights, covered wheel wells, center fill over axles.

Pin on mechanical air booster w/ shims.

1982 LOAD KING 50 TON TRI/A LOWBOY, BEAM SUSP, FOLDING WIDE NECK, 8' X 20' DECK, OUTRIGGERS, POWER UNIT, NON-GROUND BEARING, 10' AXLE SPREAD, BEAVER TAIL, 3 KING PIN SETTINGS, S/N: 12063

NEW LOADKING 5TH WHEEL TILT TRAILER, 303 TTG, 26 FT TILT DECK 4 FT STATIONARY, 8 FT 6 IN WIDE, DECK HEIGHT 38" LOAD CAPACITY 60,000 LBS, CALL FOR ADITIONAL DETAILS $39,500 PLUS FET TAX (12%)

18" LOW DECK HEIGHT, 12FT 9 INCH GOOSENECK WITH 26FT MAIN DECK 60" AXLE SPACING 110" AND 86" SWING CLEARANCE 30 INCH FRONT FLIP RAMPS, AIR LIFT 3RD AXLE 2RD TAIL LIGHT PACKAGE WITH STROBE MULTIPLE HEIGHT CONTROL ON LEVLING VALVE, BACKHOE TRAY EXCAVATOR...

Reinforced Front Sloping Access Grouser Bars on 8" Centers Front Mounted Flip Ramps SIDE LOAD PACKAGE Reinforced Flanges Top Flange Wear Plate Additional Crossmembers D-Rings & Standard Upper Flange Reinforcing (8) D-Rings (Bent) per Side of Deck (2)...

Built with the downward pitch so you can run tall or shorter tires on 1 end (or less shim with same size) and no it isn't bent lol. 2013 Load king single axle spreader bar. 37" bracket centers

Quad axle detach (pin on 4th axle), 25' well, 55" axle spacing, tires 50 to 80% rubber, air lift 3rd axle, 2 king pen settings, brakes on front 2 axles 80%, brakes on back 3rd axle 30%

Hydrailic folding neck 18' well