Livestock Waterers Farm Supplies For Sale In Yonkers

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. The low profile design and fully hinged door provides animals better access to the water.

Control Diaphragm w/ ABS Stem & Strainer

SPI 3.75" Brass Short Float Stem only.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour. The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe.

Nature's ground water temperature does this job. 2-2" drain holes for fast clean out. Seamless sidewall cannot leak. Optional wing bolts are available for Grade A inspections. Polar Max Drinkers operate like thermos all year long.

SPI foamed 4x4 energy free waterer door only.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

Rubber shut-off pad and ABS plastic and stainless steel internal parts ensure long life. Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Valve seat rotates for extended life. Float and arm are molded of high-impact styrene and the valve body is made of Delrin. Overall length is about 6". Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Blue Flap for WPM20 Cattle Waterer

Use this valve assembly with the J303 with without heat.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Guaranteed for 1 year & SAFE IN PLASTIC. Thermostaically controlled to only run when necessary.

Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021). Provides just the right height to fill buckets without a hose. Can only be used with the Upright Water Caddy (24183).

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

Robert's Brass thumbscrew that connects the short arm and long arm.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism.

Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Won't rust, resists rot & holds up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.