Livestock Waterers Farm Supplies For Sale In Tempe

White styrofoam triangular disc float only.

We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe. This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Backed with the strongest warranty available. Water circulation is a assisted with our patented baffle design and discharge ports. More drinking length. Warmer water pushes through the ports and cooler water returns under the baffle.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Serves 225 beef, 100 dairy, 175 cow/calf. 2-2" drain holes for fast clean out. Seamless sidewall cannot leak. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

This unit fits the Model 101, 202 & 404 with or without heat.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

5-year warranty. Tank dimensions: 51 1/2" long x 29" wide x 14" high.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

Heating element ONLY for the Johnson Concrete Model J360.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Water pressure and 375 gallons per hour capacity. The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. Anti-siphon feature makes this valve approved for Grade A dairy farms.

The pressure plate is made of the same strong nylon material, and provides fresh, clean water. This non-siphoning bowl is extremely resistant to damage and is easy to keep clean. Made of Strangkolon-nylon material.

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

SPI 2 1/2" Brass Short Float Stem only.

Available in Forest Green in stock, also available in Ash Grey, Black, Blue, Red & Tan colors for special order. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness &...

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Four recessed anchor notches for secure installation. The bottom has a cavity for warm climate installations only. Easy access to valve and heater. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch...

It will take abuse! Won't rust, resists rot & holds up to chemically active soil conditions. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.