Livestock Waterers Farm Supplies For Sale In Spokane

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Screw that holds the float connect to the top of the float.

A drain plug for Arkfeld waterers - 2" in size - Cork.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Use this valve assembly with the J303 with without heat.

The non-corrosive metal case is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Valve works with up to 70 lbs. Water pressure and 375 gallons per hour capacity.

This white pin holds the upper arm to the top base.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

3 year warranty. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common...

The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. #4 on breakdown Pride of the Farm Link pin only.

These valves are easy to set up and install and their function is so simplistic it is hard for them to fail. After 3 weeks of use, we have no leaks or overflows. That gives me peace of mind.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard tail length...

Control Diaphragm w/ ABS Stem & Strainer

Robert's Brass cotter key that connects the long arm to the valve body.

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

Easy access to valve. Simple water level adjustment, easy to clean. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad.

Tanks measure 63 1/2" L x 18" W x 12" deep. The upright water tank has a cap at the top for easy filling. Constructed of an FDA-approved plastic. Fits most flat walls of trailers and comes with a shut-off valve and two tie straps.

SPI 351/352 (old style) Rubber Drain Plug only .

The rust-proof plastic cover is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

This is the arm that opens & closes the plunger. No other parts come with the Cam Link. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

This round barrel-shaped tank holds 35 gallons of water. A great new way to haul additional water for your animals in your trailer or in the back of the pickup.

Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve. Water enters the MiraFount at 45 to 48 degrees. Capacity: 50 hd beef, 30 horses, 1-9" ball closure 26" x 28" x 16" tall.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard tail length...

Tolerance to water level - you don't have to worry about summer & winter water levels. Foam insulation between walls has an R-value of 7.14". No heat well needed; use an 8-12" tile; can be fitted on most existing pads.