Livestock Waterers Farm Supplies For Sale In Simi Valley

SPI foamed 4x4 energy free waterer door only.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

SPI 351/352 (old style) Rubber Drain Plug only .

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Robert's 1/2" rubber plunger seat only.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

O'Ring only replacement for Frost Pro Accessory.

15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Can only be used with the Upright Water Caddy (24183). Includes storage compartment. Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021). An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage.

The Pride of the Farm "Knight" Large Animal E-Drinker. Great value & great features don't have to come in a boring, boxy profile. 250W heater, 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous...

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

This diaphragm fits all Jug Model Valves.

All edges have been rounded for safety & strength. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. Dimension: 50" x 33 1/4" x 24 1/4"

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve. #7 on breakdown.

Water pressure and has a capacity of 375 gallons per hour. The non-corrosive metal case is fitted with a 3/4" female hose connection. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

#4 on breakdown The connect the Cam & Power Link to the VP124 valve body. Pride of the Farm Link pin only. You will need 2 per valve assembly.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

This part number is for the arm only & is usually used on the Polar Max waterers. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

XtraFlo compact diaphragm valve has full-flow, high volume fill. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. XtraFlo is UV stabilized and corrosion resistant.