Livestock Waterers Farm Supplies For Sale In Seattle

The top entry model provides an air gap, preventing back-flow. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. 14, 15, 16 in parts list.

The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

SPI 351 (old style) gasket only.

SPI Drain Plug (#11) for all New Generation waterers.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Filter replacement for Topaz & Megaflow Valves.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! 15" OD, corrugated plastic tubing.

Unaffected by ground movement due to freezing & thawing. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. It will take abuse!

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

Polyethylene Blue in color. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. 22" W x 32" L x 26" H

Saves money by using power only when temperatures require. Operates with any 15 amp 120V electric heater or fan. Has many uses around the home & farm. Five controlled temperatures (one just right for you) & no installation required.

Manufacturer recommends that you secure tank with ratchet tie-downs (not provided) to prevent movement from side-to-side while traveling. 35 gallon FDA approved plastic is warranted for 3 years.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers. Turns on at 36 degrees and turns off at 48 degrees.

White polyethylene disc float only.

New sleek design tanks work for three different applications. Constructed of an FDA-approved plastic, the Hay Rack Water Caddy comes with a 8' hose kit and shut-off valve to allow filling from the ground.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Float Arm for the Mira Fount M3330 waterer.

Thermostaically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float.

3/4" male to female hose used to hook up the water line to the waterer.