Livestock Waterers Farm Supplies For Sale In Sacramento

SPI 2 1/2" Brass Short Float Stem only.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and 375 gallons per hour capacity. The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded...

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

80 Watt Immersible element used in the PC 1 waterer.

Megaflow Yellow Float Only.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

SPI 351/352 New Generation Gasket.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Contains J-bolt brackets which mount to tank edge. PVC pipe from valve to hose threads.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

Arkfeld waterer element replacement. 1000 watt x 120 volt heating element only.

Pride of the Farm 1/4" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

You will need 2 per valve assembly. The connect the Cam & Power Link to the VP124 valve body. Pride of the Farm Link pin only. #4 on breakdown

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! Won't rust, resists rot & holds up to chemically active soil conditions.

Small inlet high pressure valve.