Livestock Waterers Farm Supplies For Sale In Plano

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Trough-O-Matic Float Valve Repair Kit

Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning. Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow.

This white pin holds the upper arm to the top base.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Heating element ONLY for the Johnson Concrete Model J360.

Drinking height is 15" Door Opening is 9 1/2" x 9 1/2" and trough holds 17 gallons of water. Result = cleaner waterer inside & out. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged...

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece...

Float Arm for the Mira Fount M3330 waterer.

Robert's Brass thumbscrew that connects the short arm and long arm.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

White polyethylene disc float only.

80 Watt Immersible element used in the PC 1 waterer.

Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs. The rust-proof plastic case comes with an adapter to fit a 3/4" male or...

The one piece construction eliminates cracking and splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety and strength. Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red...

Great value & great features don't have to come in a boring, boxy profile. Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market. It takes a quarter turn with a straight edge screwdriver.

Pride of the Farm 1/4" Orifice on a VP124 Valve. #7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included).

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.