Livestock Waterers Farm Supplies For Sale In New Orleans

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Anti-siphon feature makes this valve approved for Grade A dairy farms. The Trough-O-Matic float valve features a longer, deeper float which gives...

XtraFlo is UV stabilized and corrosion resistant. XtraFlo compact diaphragm valve has full-flow, high volume fill. The top entry model provides an air gap, preventing back-flow. Fully submerged valve is almost indestructible to livestock and models come...

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic cover is fitted with a 3/4" female hose connection.

Extra supply line protection, patented water circulation, multiple constant flow and drain options. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies.

Screw that holds the float connect to the top of the float.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1/2" female thread is 5" high and 3" in diameter.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

SPI 2 1/2" Brass Short Float Stem only.

They can also be easily stacked for deeper installations. It has an excellent insulating property of R15 and amazing structural strength. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect...

SPI hatch cover for model 4x4 energy free waterer.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Up to 50% more usable water capacity than the competition. This unit is insulated with 3 1/2" of polyurethane insulation. Earth Tube is suggested with installation. 5 year warranty.

Arkfeld waterer element replacement. 1000 watt x 120 volt heating element only.

For tanks with thicker walls such as concrete or wood, order the optional Breather Collar Kit. The Freeland Valve for livestock watering tanks is automatic, adjustable, approved non-siphoning, corrosion-proof and freeze-resistant.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Weather strip & an insulated sleeve for the supply line come with each unit. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. It's design reduces stock damage and minimises blockage.

B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached)

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.