Livestock Waterers Farm Supplies For Sale In Mobile

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

It is loaded with features not available on any competing trough drinker. 70 Gallon Open Trough Tank offers more features. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies.

Constructed with FDA-approved materials, with a vent in the fill cap on top of the caddy. Extra capacity 39 gallon tank fits snuggly in the corner. 3-year warranty. No stand available for this water caddy.

1/2" orfice only for the inside of a Franklin Valve.

Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. SAFE IN PLASTIC TANKS. 1 year warranty. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed...

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Stock Tank With Built-In Drinker Model PRE224BID comes standard with one built-in drinker. -Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker...

You do need proper installation to prevent the supply line underneath the drinker from freezing. Our drinker has 17 gallons of capacity. The Pride of the Farm the Performance One E-Drink is electrically heated Energy Efficient You Only Need One Unit to...

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External Adjustment Screw for water...

Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021). Can only be used with the Upright Water Caddy (24183). Provides just the right height to fill buckets without a hose.

Eliminates algae problems as water is not exposed to sunlight. Tested in continental U.S. to remain frost-free with as few as 6 head drinking every other day. Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground...

No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only. #3 on breakdown.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The rust-proof plastic cover is fitted with a 3/4" female hose connection.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

XtraFlo compact diaphragm valve has full-flow, high volume fill. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Replacement drain plug for MiraFount Waterers.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.