Livestock Waterers Farm Supplies For Sale In Milton

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Has many uses around the home & farm. Turns on at 35 degrees & turns off at 45 degrees. Five controlled temperatures (one just right for you) & no installation required. Works automatically to ambient temperature.

This unit fits the Model 101, 202 & 404 with or without heat.

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Attaches to standard ¾” garden hose. Rugged plastic housing is molded from high-grade polystyrene. Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi.

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute.

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

Apex replacement float with string included.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI 351 (old style) gasket only.

SAFE IN PLASTIC. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. The 250W elemnt is encased in aluminum for durability & safety. 1 year warranty.

Earth Tube is suggested with installation. It has a 15" drinking height, 9 1/2" x 9 1/2" door opening. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates...

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

22" W x 32" L x 26" H 5 year warranty. The new Value Series waterers from SPI are a "no tools required" waterer. With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker.

No inside working parts included. This piece holds the plunger and upper arm. The inside base of the Franklin Valve.

The last number on the VP2 matches up with the VP1 valve. If your drinker originally took a VP124, order a VP224, etc. VP2, from our program of continuous improvement, is designed to accomplish several things.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

Can only be used with the Upright Water Caddy (24183). Provides just the right height to fill buckets without a hose. An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

Includes a strap/hardware kit and a free 10' hose. 3-year warranty. Comes standard with two shut-off valves, one for hose and the other for filling a bucket. No stand available for this water caddy.

Dimensions: 41" x 20" x 23". Maximum 24-hour electrical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

Using a brass push-button water valve, the simplest method of watering livestock, it has no paddle to wear out or get jammed with hay and debris between paddle and bottom of bowl. And, despite the low price, this is definitely not a cheaply constructed...

Continuous flow disc and repair kit for use with Hudson valves.