Livestock Waterers Farm Supplies For Sale In Lowell

SPI 4x4 - 3/8" x 1" x 22' gasket only.

New silicone shut-off pad and ABS plastic and stainless steel internal parts ensure long life. Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off.

White styrofoam round disc float only.

High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability and longevity.

The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped. It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to...

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Unlike the original concept of the submerged bulb to sense water temperature, this unit senses the air temperature immediately surrounding the water basin, therefore, it is not designed for water submersion.

The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Guaranteed for 1 year & SAFE IN PLASTIC. Thermostaically controlled to only run when necessary.

Heating element ONLY for the Johnson Concrete Model J360.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

Pride of the Farm 1/4" Orifice on a VP124 Valve. #7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included).

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The dogs chew on everything so I used the metal housing. These valves are easy to set up and install and their function is so simplistic it is hard for them to fail. Arrived within three days.

Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers. Turns on at 36 degrees and turns off at 48 degrees.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Inside repair kit for Topaz & Megaflow Valve.

This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Extra capacity 39 gallon tank fits snuggly in the corner. Includes a strap/hardware kit and a free 10' hose. Constructed with FDA-approved materials, with a vent in the fill cap on top of the caddy.

This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.