Livestock Waterers Farm Supplies For Sale In Lansing

A round float for Arkfeld,SPI or Mira Fount waterers.

This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

A brass rod float arm 1/4" x 1 1/2" with threads on each end. Connects valve to 301 round float

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

This economy tank-side mounting bracket fastens securely with a thumb screw and bushing--no tools needed! Connects directly to garden hose, and fits all standard tanks and some plastic tanks.

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & hold up to chemically active soil conditions. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

Tank dimensions: 51 1/2" long, 29" wide, 24" high. 1 1/4" pipe plug that will accept a heater or float valve system.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

1/2" orfice only for the inside of a Franklin Valve.

80 Watt Immersible element used in the PC 1 waterer.

Polar Max Drinkers operate like thermos all year long. Foam insulation between walls has an R-value of 7.14". Stainless steel bolts & removable top afford easy access to plumbing. Optional wing bolts are available for Grade A inspections.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI 3.75" Brass Short Float Stem only.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Polar Max Drinkers operate like thermos all year long. Foam insulation between walls has an R-value of 7.14". Stainless steel bolts & removable top afford easy access to plumbing. Optional wing bolts are available for Grade A inspections.

White styrofoam round disc float only.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

3/4" orfice only for the inside of a Franklin Valve.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!