Livestock Waterers Farm Supplies For Sale In Huntsville

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

SPI 351/352 (old style) Rubber Drain Plug only .

White styrofoam triangular disc float only.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Tolerance to water level - you don't have to worry about summer & winter water levels. No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

Foam filled-R value of 7.5 per inch. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Simple water level adjustment, easy to clean.

SPI 351 (old style) gasket only.

Tolerance to water level - you don't have to worry about summer & winter water levels. No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

SAFE IN PLASTIC. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. Operates effecicently at the bottom of the bucket because warm water rises. The 250W elemnt is encased in aluminum for durability & safety.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

The Topaz is compact, robust and manufactured from non-corroding materials. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons...

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Robert's 1/2" rubber plunger seat only.

XtraFlo is UV stabilized and corrosion resistant. Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI white corrugated baffle for model 4x4 energy free waterer.

This is the arm that opens & closes the plunger. #2 on breakdown. No other parts come with the Cam Link. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

The heat tube is designed to mate with the cavity under the drinker base. Both the water line & the electrical supply can enter from below. You should use silicon caulk to assure an airtight fit.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected...

SPI foamed 4x4 energy free waterer door only.

This diaphragm fits all Jug Model Valves.