Livestock Waterers Farm Supplies For Sale In Hawaii

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

The heat tube is designed to mate with the cavity under the drinker base. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

The VP2 uses the same Base, Assembly Nut and O-Ring of the old VP1 making conversion easy. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free...

It's design reduces stock damage & minimises blockage. The Tru-Test Apex Xtraflo 1 1/4" valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism. You can mount this valve on the bottom or on the side and has a bouyancy equal...

Foam insulation between walls has an R-value of 7.14". The WPM14 is an extremely rugged 4 door opening, energy free unit for sheep or calves. Stainless steel bolts & removable top afford easy access to plumbing.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Inside repair kit for Topaz & Megaflow Valve.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation. 37 1/4"L x 28" W x 12 3/4" H 11 # 5 year warranty

Backed with the strongest warranty available. Grade A compliant. Extra supply line protection, patented water circulation, multiple constant flow and drain options. It has 70 inches of drinking length and holds 70 gallons.

Connects to 3/4" garden hose or adaptable for pipe. This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Typical heating cost for one heating season only $10! 250 Watt, 110 volt heater.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

The water basin holds 15 gallons of water and refills to your level of desire. Keep your animal's water clean and fresh! Promote important water consumption with fresh clean water.

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. 8' 2" Diameter x 26" H 113# 5 Year Warranty

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

This diaphragm fits all Jug Model Valves.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

Protect your underground water line from freezing. Can be used with Mirafount or other brand installations. 14" x 30" long, 2" thick.

Pride of the Farm 5/32" Orifice on a VP124 Valve. #7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included).

Includes seat and float. Repair Kit for Water Control Valves model 825H , 825P , 830H , 830P , 825ASH and 825ASP .

The cavity can be used to make the connection from the supply line to our valve. Drinker is very easy to clean--no disassembly for cleaning required. AS VERSATILE AS YOU CAN GET. Optional heater, 250 watts, 110 volts.