Livestock Waterers Farm Supplies For Sale In Elk Grove

The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with a simple reliable design requiring no floats, rods or guards. The Freeland Valve for livestock watering tanks is automatic, adjustable,...

Simplicity -- few parts; 2. The last number on the VP2 matches up with the VP1 valve. VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series. Greater tolerance to operation in dirty conditions; 4.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

Robert's Brass cotter key that connects the long arm to the valve body.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

O'Ring only replacement for Frost Pro Accessory.

51 1/2" L x 27 1/2" W x 13" H 19# 5 year warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

This unit is insulated with 3 1/2" of polyurethane insulation. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation...

Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.

An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage. Provides just the right height to fill buckets without a hose. Can only be used with the Upright Water Caddy (24183).

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

5 year warranty. It is FDA & HPB approved, food grade, recyclable plastic. An Earth Tube is suggested with installation. Peaked roof & raised ribs around the door openings prevents manure, feed & other contaminants from being washed into the bowl.

Has a 3-year manufacturer's guarantee. Comes with shut-off valve. Tank measures 64 1/2" L x 18" W x 12" deep. The Lay Down tank is an easy way to haul water on the floor of your trailer or in the back of a pickup.

SPI hatch cover for model 4x4 energy free waterer.

Lower access opening is 6" x 19". Dependable, non-siphoning Durapride valve. It takes a quarter turn with a straight edge screwdriver. Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Robert's 3/4" leather cup ring that fits on the brass plunger.

5-year warranty. 35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug). Measures 37” x 27 1/2” x 13”, ash grey color.