Livestock Waterers Farm Supplies For Sale In Chesapeake

Water pressure and 375 gallons per hour capacity. Valve works with up to 70 lbs. The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. Anti-siphon feature makes this valve approved for Grade A dairy farms.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

White styrofoam triangular disc float only.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Robert's Brass thumbscrew that connects the short arm and long arm.

The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access to the valve. 5 year warranty. It has a 15" drinking height and four 9 1/2" x 9 1/2" door opening.

Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir. Thermostatically controlled to only run when necessary.

The Robert's 3/4" brass valve housing only.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Made to either fit ahead or behind the fender wells, with convenient access to water fill caps on both sides. An innovative way to haul fresh water in your pickup bed while still allowing for easy hook-up to a gooseneck trailer.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Often used in Franklin & Arkfeld waterers. Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers.

The brass arm and black round ball float only for an Apex Valve.

The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

52 1/2" L x 46 1/4" W x 23 1/2" H 34# 5 Year warranty All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the...

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 1/2" orifice Valve complete with plunger and arms.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Guaranteed for 1 year & SAFE IN PLASTIC. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary.

1 year warranty. SAFE IN PLASTIC. Operates effecicently at the bottom of the bucket because warm water rises. The 250W elemnt is encased in aluminum for durability & safety. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

Robert's 3/4" rubber plunger seat only.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.

1000 Watt Immersible element used in the PC2 or PC10 waterer.