Livestock Waterers Farm Supplies For Sale In California

SPI 3.75" Brass Short Float Stem only.

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

Trough-O-Matic Float Valve Repair Kit

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

XtraFlo is UV stabilized and corrosion resistant. The top entry model provides an air gap, preventing back-flow. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Use this valve assembly with the J303 with without heat.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External Adjustment Screw for water...

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

The High Country Plastics TC-63 Pickup Bed Water Caddy is an innovative way to haul up to 63 gallons of fresh water in your pickup truck while still allowing for easy hook-up to a gooseneck trailer.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Filter replacement for Topaz & Megaflow Valves.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

This unit fits the Model 101, 202 & 404 with or without heat.

Capacity: 150 hd beef 60 hd dairy, 2-9 1/4" ball closure. University testing showed that the fountain worked when temperatures were at -100 degrees wind chill and never required any external energy source.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.