Livestock Waterers Farm Supplies For Sale In Billings

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs. The rust-proof plastic case comes with an adapter to fit a 3/4" male or...

With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows. Up to 50% more usable water capacity than the competition. It has a 15" drinking height and four 9 1/2" x 9 1/2" door opening.

SPI 351/352 New Generation Gasket.

It has double walled foam-filled molded polyethylene construction. Engineered with the farmer in mind, this waterer allows easy access to the submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance...

It is FDA & HPB approved, food grade, recyclable plastic. SPI energy free models have a set back seal & drain to help couteract the problems associated with door freeze ups. The low profile design & fully hinged door provids animals better access to the...

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

Each valve comes with installation instructions, warranty information and parts list. Rubber shut-off pad and ABS plastic and stainless steel internal parts ensure long life. Valve body parts are made out of a durable glass-filled nylon, which is vented...

22 gallon capacity with a maximum usage of 150 Beef cows. This unit is insulated with 3 1/2" of polyurethane insulation. SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years...

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Float Arm for the Mira Fount M3330 waterer.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

#4 on breakdown Pride of the Farm Link pin only. You will need 2 per valve assembly. The connect the Cam & Power Link to the VP124 valve body.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

Robert's 3/4" rubber plunger seat only.

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

Megaflow Yellow Float Only.

Made of durable polyethylene construction and has stainless steel anchor bolts included. Only requires 4kW of electricity during a week of 25 below zero temperatures. 28” x 26” x 14” tall.

Pride of the Farm Element for electric waterer units.

Meets "Grade A" Dairy requirements (non-siphoning). Very efficient use of energy. 22" W x 27" L x 26" H 7 gal. Engineered with the farmer in mind, this waterer allows easy access to submersible heater, water line, incoming services and provides effortless...

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

The bottom has a cavity for warm climate installations only. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Four recessed anchor notches for secure installation.

Available in Aqua Blue color only. The larger tanks come with 1.25� drains installed. 40 1/2" x 28 1/4" x 14 1/4" If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...