Livestock Waterers Farm Supplies For Sale In Antioch

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

B79P includes:Ref. 14, 15, 16 in parts list. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

This economy tank-side mounting bracket fastens securely with a thumb screw and bushing--no tools needed! Connects directly to garden hose, and fits all standard tanks and some plastic tanks.

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers.

The Freeland Valve for livestock watering tanks is automatic, adjustable, approved non-siphoning, corrosion-proof and freeze-resistant. Included with the Valve is a universal mounting kit which permits hook-up to 1/4" copper pipe, 1/2" metal pipe, garden...

Screw that holds the float connect to the top of the float.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system. Each valve comes with installation instructions, warranty information and parts list.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage. Includes storage compartment. Can only be used with the Upright Water Caddy (24183). Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021).

35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug). Measures 37” x 27 1/2” x 13”, ash grey color. 5-year warranty.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Our drinker has foam filled double wall construction which adds to the efficiency. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation and efficient heat dispersal into the drinker troughs.

Stock Tank With Built-In Drinker Model PRE224BID comes standard with one built-in drinker. -Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker...

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour. The non-corrosive metal case is fitted with a 3/4" female hose connection.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

250W heater, 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches for secure anchoring & spring loaded pin allows easy removal of access panel.

All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

The VS15E is molded from a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. 22" W x 27" L x 26" H 7 gal. Meets "Grade A" Dairy requirements (non-siphoning).

Apex replacement float with string included.

15" OD, corrugated plastic tubing. Won't rust, resists rot & holds up to chemically active soil conditions. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.