Livestock Equipment Farm Equipment For Sale In Kansas

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

Pride of the Farm Element for electric waterer units.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

Replacement Mounting Bracket for 3000 Series & EZ Weigh 5, 6 or 7 indicators.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. All edges have been rounded for safety and strength.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Use this valve assembly with the J303 with without heat.

28 1/2" x 20" x 10 1/4" The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 3 year warranty. All edges have been rounded for safety & strength.

No other parts are included with this Power Link. #1 on breakdown. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's Brass cotter key that connects the long arm to the valve body.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

Connects two antennas to one XRP2 Reader.

Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. THIS UNIT IS FOR METAL TANKS ONLY. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

This part number is for the arm only & is usually used on the Polar Max waterers. #12-3 on the breakdown. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Stainless steel access plates. Available in light gray.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

The brass arm and black round ball float only for an Apex Valve.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Mounting hardware supplied Used for cattle this antenna has superior range! Some applications may require multiple antennas & the Dual antenna Adaptor.

Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & hold up to chemically active soil conditions.

This bolt package is for Models 101, 202 & 404 with or without heat.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.