Kuhn New Equipment For Sale In Cross Plains

REEL AUGGIE 22.5X11.25 WHEELS 3 AUGER 36" DISCHARGE LIGHT KIT 640XL SCALE

TWIN SCREW VERTICAL TMR W/SIDE DISCHARGE LEFT SIDE DOOR NO WHEELS OR TIRES 48" CHAIN AND SLAT DISCHARGE 20" SET OF 8 KNIVES LIGHT KIT LADDER 640XL WEIGHTRONIX SCALE W/2" NUM 22.5X11.25 WHEELS AND 425 TRUCK TIRES

24FT TWIN MERGER 2 PT HITCH 500/45-22.5 WHEELS AND TIRES DELUXE HYD

SINGLE AXLE ROTARY RAKE W/18X18.50-8 TIRES 8'8" ROTARY DIA ,CLEAN SWEEP 7'3" WORKING WIDTH 10'6" MANUAL RAISE UP AND DOWN

BOX SPREADER 240 HEAPED CU FT (210 BUSHEL) SINGLE AXLE 16.5 X 16.1 14 PLY IMP TIRE T-ROD APRON FRONT SPLASH GUARD NOT INSTALLED HYD END GATE W/2 CYLINDERS

SLINGER SPREADER 16.5X16.1 14PLY TIRE 1"3/8 1000 PTO NON CV FRONT AND REAR SPLASH GUARD INSTALLED

SLC126A01 SLINGER SPREADER 19L-16.1 18 PLY IMP TIRES CLEVIS HITCH 1"3/8 NON CV 1000 PTO LIGHT KIT FRONT AND REAR SPLASH GUARD INSTALLED

20 FT EXCELERATOR SELF LEVELING HITCH 22" 6MM EXCALIBUR BLADES STAR WHEELS AND HYD ROUND BAR REEL MANUAL GANG ANGLE ADJ NO GAUGE WHEELS

4X6 OPTICUT ROUND BALER 14 KNIFE OPTICUT W/DROP FLOOR,5 BAR PICKUP 19.0X45X17 TIRES 540 GEARBOX 1"3/8 540 PTO ENDLESS BELTS HIGH SILAGE DRIVEN ROLLER CLEANER NET WRAPPING SYSTEM ONLY FIXED PICKUP WHEELS CLEVIS HITCH CCI50 MONITOR AUTOMATIC CHAIN LUBE...

2400 GALLON SLINGER SPREADER 8 BOLT STANDARD TANDEM AXLES 19L-16.1 18 PLY FLOTATION TIRES 1"3/8 1000 PTO NON CV

2400 GALLON SLINGER SPREADER 8 BOLT STANDARD TANDEM oAXLES 19L-16.1 18PLY FLOTATION TIRES 1"3/8 1000 PTO NON CV FRONT AND REAR SPLASH GAURD

18P0101 SLINGER SPREADER 16.5X16.1 14 PLY TIRE 1"3/8 1000 PTO NON CV FRONT AND REAR SPLASH GUARD INSTALLED

SLINGER SPREADER W/FRONT AND REAR SPLASH GAURD , 1"3/8 NON CV 1000 PTO,19LX16.1 TIRES GOOD. FLIGHTING IS BENT AND SOME PUSHER ARE BENT OVER. SOME SMALL HOLES IN SIDES OF SPREADER

ONE HYD MOTOR IS BAD ON DISCHARGE RIPP'S DAIRY VALLEY BOUGHT DEMOED MIXER BUT WANTED A NEW , DISCHARGE. 45" 4 AUGER DISCHARGE WAS ON BTC 190 .

, FLIGHTING IS GOOD,SOME REAR PUSHER ARE BENT . SLINGER SPREADER W/1"3/8 1000 PTO,FRONT AND REAR SPLASH , GAURD,21.5X16.1 TIRES RIGHT REAR IS GETTING BALD. JUST HAD NEW EXPELLER SHAFT,HAMMERS AND BOLTS W/BUSHINGS NEW SHROUD,ALL REPLACED IN DEC OF 2017.

2400 GALLON SLINGER SPREADER 8 BOLT STANDARD TANDEM AXLES 19L-16.1 18 PLY FLOTATION TIRES 1"3/8 1000 PTO NON CV

HELIX REEL AUGGIE W/ROUGHAGEMAXX KNIVES, , HAY MAXX KIT 1"3/4 1000 PTO,SLIDE TRAY DISCHARGE, ,, WEIGH TRONIX 1040XL SCALE W/RD 64XL REMOTE DISPLAY ,, 425 TRUCK TIRES. THERE HAS BEEN A PLATE WELDED ABOVE DOOR DOOR HAS BEEN REPLACED.

SLINGER SPREADER W/FRONT AND REAR SPLASH GAURD , 1"3/8 NON CV 1000 PTO,19LX16.1 TIRES GOOD. FLIGHTING IS BENT AND SOME PUSHER ARE BENT OVER. SOME SMALL HOLES IN SIDES OF SPREADER

ONE HYD MOTOR IS BAD ON DISCHARGE RIPP'S DAIRY VALLEY BOUGHT DEMOED MIXER BUT WANTED A NEW , DISCHARGE. 45" 4 AUGER DISCHARGE WAS ON BTC 190 .

12 WHEEL V RAKE 23' WORKING WIDTH0

SINGLE AXLE ROTARY RAKE W/18X18.50-8 TIRES 8'8" ROTARY DIA ,CLEAN SWEEP 7'3" WORKING WIDTH 10'6" MANUAL RAISE UP AND DOWN

25'7" WORKING WIDTH PULL TYPE TEDDER

12 WHEEL V RAKEd 23' WORKING WIDTH

SLINGER SPREADER W/28LX26 16 PLY TIRES 2 REAL GOOD

SLINGER SPREADER W/540 PTO,19LX16.1 TIRES,WOOD RAILS

REEL AUGGIE 22.5X11.25 WHEELS 3 AUGER 36" DISCHARGE LIGHT KIT 640XL SCALE