Irrigation Tubing Fittings

• Works with all 1/4 in. barb fittings: Yes
• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Tubing Length (ft.): 500
• Color Family: Blacks
• Assembled Width (in.): 11 in

• Outer Diameter (in.): .255
• For use with spot watering emitters and other drip irrigation devices: Yes
• Returnable: 90-Day
• Tubing Length (ft.): 100
• Irrigation System Component: Tubing
• Color Family: Blacks

• Returnable: 90-Day
• 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.: Yes
• Tubing Length (ft.): 100
• Assembled Height (in.): 3.8 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• Inner Diameter (in.): .50
• Manufacturer Warranty: 3 year warranty
• Assembled Width (in.): 21 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Height (in.): 4 in
• Resistant to cracking, heat, UV rays and chemicals: Yes

• Color Family: Blacks
• Outer Diameter (in.): 0.25
• Assembled Depth (in.): 3.0 in
• Drip Line/Tubing Type: Porous Tubing
• Watering provides full length, slow and steady flow: Yes
• Manufacturer Warranty: None

• ✓ 50 ft. L
• ✓ Made from UV resistant materials for a long life in the landscape
• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)

• Tubing Length (ft.): 50
• Returnable: 90-Day
• Inner Diameter (in.): .125

• Use as a primary feeder line from a 1/2 in. poly-tube: Yes
• Irrigation System Component: Tubing
• Manufacturer Warranty: 3 years
• Outer Diameter (in.): 0.25
• Returnable: 90-Day
• Pressure Rating: 60 psi

• ✓ Reduces weed growth
• ✓ 1/2 GPH flow rate from each emitter

• Assembled Width (in.): .7 in
• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Porous Tubing
• Manufacturer Warranty: 3 Years

.25

• ✓ 1/2 GPH flow rate from each emitter
• ✓ 100 ft. L

• Assembled Depth (in.): 9 in
• Tubing Length (ft.): 100
• Inner Diameter (in.): .25
• Outer Diameter (in.): .25

• ✓ Flexible design allows for easy of use
• ✓ Easily installed

• Color Family: Blacks
• Pressure Rating: 60 psi
• Inner Diameter (in.): 0.25
• Irrigation System Component: Tubing

• ✓ For cold water use only
• ✓ Sized to 0.700 in. Outside diameter

• Assembled Depth (in.): 3.000 in
• Outer Diameter (in.): 0.5
• Pressure Rating: None
• Tubing Length (ft.): 50

• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution
• ✓ Use as a drip hose to irrigate containers, gardens and flower beds
• ✓ Dimensions = 0.250 O.D. x 0.170 I.D.

• Manufacturer Warranty: 1 year
• Irrigation System Component: Pipe
• Assembled Height (in.): 2.7 in

• ✓ Use for watering flowerbeds, potted plants, containers and vegetable gardens along a line
• ✓ Used in conjunction with 1/4 in. drippers
• ✓ For short runs up to a maximum length of 30 ft.

• Drip Line/Tubing Type: Porous Tubing
• Assembled Height (in.): 2.25 in
• Color Family: Blacks

• ✓ Total Satisfaction Policy
• ✓ Brown tubing
• ✓ 1/2 in x 50 ft. coil w/ built in pressure compensating emitters
• ✓ Works like soaker hose – only better
• ✓ Rugged and flexible

• Tubing Length (ft.): 50

• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.
• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings
• ✓ Extruded in USA
• ✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline
• ✓ Total flow per 100 ft.: 100 GPH (1.66 GPM)

• Manufacturer Warranty: 3 years

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• ✓ Can be installed above or below ground

• Outer Diameter (in.): .50
• Manufacturer Warranty: 3 Year Warranty
• Assembled Width (in.): 17.5 in

• Assembled Depth (in.): 3 in
• Color Family: Blacks
• Irrigation System Component: Pipe
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• 50 ft. drip soaker ideal for watering planters and small plants in rows and borders: Yes
• Inner Diameter (in.): 0.25

• ✓ Black in color
• ✓ Sized to 0.7 in. outside diameter
• ✓ For drip irrigation applications
• ✓ Use to distribute water in a drip irrigation system

• Assembled Height (in.): 9.5 in
• Irrigation System Component: Tubing

• ✓ Maximum recommended length of run from a single water source at 25 PSI is 202 ft.
• ✓ Reduced clogging due to large drip emitter labyrinth water passage
• ✓ No special tools or glue are needed
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)

• Pressure Rating: 10-45 PSI
• Irrigation System Component: Tubing

• ✓ UV resistant
• ✓ Pressure-compensating emitters ensure even watering and save water
• ✓ Factory-installed emitters cut installation time

• Outer Diameter (in.): .71
• Manufacturer Warranty: 1 year
• Inner Diameter (in.): .62

• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens
• ✓ Easy to install
• ✓ 60 ft. in length

• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 60
• Manufacturer Warranty: None

• ✓ Easy to cut tubing
• ✓ For drip irrigation applications
• ✓ Made from a flexible PE blend material

• Manufacturer Warranty: None
• Color Family: Browns / Tans
• Assembled Height (in.): 9.250 in

• ✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
• ✓ 250 ft. length for large installations
• ✓ 70 psi
• ✓ Run water to individual plants

• Irrigation System Component: Tubing
• Tubing Length (ft.): 250

• ✓ No special tools or glue are needed
• ✓ Allows water to drip directly to the root zone, delivering a beneficial deep watering

• Pressure Rating: 25
• Assembled Height (in.): 7.75 in
• Inner Diameter (in.): 0.25
• Color Family: Blacks

• ✓ Conforms to strict ASAE standards for minimum inside diameter and wall thickness
• ✓ Used for connecting 1/2 in. hose to emitters and micro sprinklers
• ✓ High-quality polyethylene material

• Returnable: 90-Day
• Tubing Length (ft.): 100
• Inner Diameter (in.): .17

• ✓ Designed to work with Toro Blue stripe drip-irrigation products
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ 3-layer Matrix technology for improved strength and flexibility

• Pressure Rating: 1 to 60 psi
• Color Family: Blacks
• Irrigation System Component: Tubing

• Inner Diameter (in.): 0.25
• Made from high quality, UV resistant materials: Yes
• Drip Line/Tubing Type: Porous Tubing
• Pressure Rating: 25 PSI
• Irrigation System Component: Tubing
• Color Family: Blacks