Hytrol Conveyor

To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec

100 thousand bushel of wheat and soybeans thru the cleaner a year. I need a hopper on the bottom end of the conveyor and a hydraulic drive at top. I would perfer an eight inch wide belt that runs flat.

This is the technology of choice in new engineered wood panel plants, but can also be used to replace aging equipment in existing plants where they can usually produce some combination of more production, better consistency, better quality and lower emissions.

Manure Spreader MODEL K G D 3 K G D 7 K G D 10 K G D 12 K G D 15 Capacity 3 M3 7 M3 10 M3 12 M3 15 M3 Lenght 5000 mm 6000 mm 7000 mm 7800 mm 8000 mm Width 2100mm 2300 mm 2300 mm 2300mm 2300 mm Height 2200mm 2400 mm 2600 mm 3100 mm 3400 mm Weight 2100...

2018 Akron GTT4010

2009 Brandt 1545LP $16,402.00

All new bearings! Used Batco 1314 with 5 HP electic motor.

8,000 bph, 4 years old, 7.5hp 1ph motor included, winch included

Brandt Conveyor 2021LP, Like New

NEW, Batco 1590

2018 Akron EXG300

2018 Akron EXG300

Model 1545 Tube Conveyor (Shown) 1525, 1530, 1535, 1540, 1545 Tube Conveyor Capacity Up to 6,000 BPH* *Capacity depends on material, moisture, density, and angle Tubing 10” Diameter Tubes Belt 15” 2 Ply Chevron Belt Speed Standard 600 FPM Top Drive...

6000 BPH 10" Diameter, 14 Gauge Tubing Steel or Stainless steel avaialble

6000bu/hr pit conveyor

For use up to 40 degrees. 30ft long Capacity varies depending on angle of use. Portable cleated belt conveyor. Electric power 5hp.

#D140 Blackwell 15' Conveyor

• 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer. CEMA "C" troughing and return rollers. • Belt speed approximately 320 FPM. • 35° x 5" dia. • 2 guide rolls on the return belt side at the tail end of the conveyor.

13 1/2" Lagged directional head pulley with 2 3/16" diameter head shaft, Browning bushings and Sealmaster bearings. Drive, nip, pinch-rail, tail pulley guards. Belt speed approximately 320 FPM.

30" x 80' Truss Frame w/Radial Stacking Carrier

2-ply belting with 3/16"x1/16" covers. 6' receiving hopper with 6" rubber flashing. CEMA "C" troughing and return rollers. 36" x 20' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

2-ply belting with 3/16"x1/16" covers. 6' receiving hopper with 6" rubber flashing. CEMA "C" troughing and return rollers. 24" x 50' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

• 15 HP electric motor drive with Leroy Somer 207 shaft mounted speed reducer. CEMA "C" troughing and return rollers. • Travel dimensions: 9'5" wide x 63' long x 14' high. • 35° x 5" dia.

2-ply belting with 3/16"x1/16" covers. 6' receiving hopper with 6" rubber flashing. CEMA "C" troughing and return rollers. 30" x 40' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

16" Lagged directional head pulley with 2 7/16" diameter head shaft. Belt speed approximately 320 FPM. Travel dimensions: 9'5" wide x 63' long x 14' high. CEMA "C" troughing and return rollers.