Hose Management Accessories Parts Department For Sale In Connecticut

Facilitates shut-off of vacuum or milk flow with Transflow or rubber tubing. This Smooth white plastic vented shut-off valve twists cleanly to a positive stop.

8'4" cable with 7/16" burr and 1/2" brush cleans 1/2" diameter hose. Simply thread the plastic covered steel cable through the hose, snap wall and cable fittings together, attach brush part to cable, and pull the brush through as the hose is thoroughly...

Vacuum-operated Stainless Steel Pinch Valve is for 5/8" tubing.

Fits all sizes of milker hose. Small silicone hose ring holds milker and vacuum hose together.

This is Blue Hose Clip for 5/8 Milk Hose. Small Hose Clip holds 1/4" or 9/32" twin vacuum hose neatly together with the milk hose.

Replacment Nylon Wear Pad for Double Bend Hose Support Arms model numbers 120215D, 120220D, 102215D, 102220D.

For smaller ID tubing such as 1/2" milker hose and 1/4" vacuum hose as in goat milker set-ups. Small Blue Rubber Hose ring holds vacuum and milker hose together for ease of handling the milking cluster in parlor, pipeline or bucket milking.

Included are boot cover and mounting bracket. This model has 5/32" push fitting and may be used for up to 7/8" ID tubing. Plastic Pinch Valve provides air-operated shut-off for milker tubing.

This pinch valve allows air-operated shut-off for 7/8" tubing.

Also fits Surge shut-off valves. Replacement Tab Retainer for Delrin vented and non-vented shut-off valves.

Replacement Blade for S200.

Replacement Blade for T100.

This is White Hose Clip for 9/16 Milk Hose. Small Hose Clip holds 1/4" or 9/32" twin vacuum hose neatly together with the milk hose.

Replacement external o-ring for Delrin vented and non-vented shut-off valves.

Replacement Brush only for Cable Kit with ID (internal diameter) of 7/16", 1/2", 9/16", 5/8" and 3/4".

Replacement Burr only for Cable Kit for tubing ID (internal diameter) of 7/16", 1/2", 9/16", 5/8" and 3/4".

Fits all sizes of milker hose. Small rubber hose ring holds milker and vacuum hose together.

The Starfish is especially designed for parallel parlor milking because its “legs” catch on the rail to hold the tensioner and hoses in the proper position. For 5/8” milk hose.

Monster Hose for Pressure Washers handles cold-water pressure up to 4,500 psi. And a durable, clear, non-marring polyurethane outer jacket. This hose features a 3/8 in. The Simpson 150 ft.

A unique cover compound gives Eaglewash I hose the durability and flexibility to handle abrasion and normal cleaning chemicals. Lightweight and easy to handle. JGB Eagleflex I is specially designed for use on pressure washer machines with working pressures...

Teflon-coated steel blade. Blade rests in closed jaws for safety. Kwikcut Hand Tubing Cutters are well-designed for ease of use and safety. BT100 Replacement Blade for T100 sold separately.

For use with Realm electric pressure washers up to 3000 PSI (Cold water use only). This is a 19 ft. Hose rated up to 3000 PSI with Quick connection for the High pressure gun. When you need extra length to reach around the house, back yard or car this...

All steel body construction with wall mounts design to minimize storage space. The included 100 ft. Rubber Hose is oil and abrasion resistant to make sure comfortable and flexible in the toughest environments, with solid brass end fittings to ensure leak-free...

The SPX-PCH25 is a 25 ft. Pipe cleaning jet hose. It is a high-pressure hose that clears dirt, debris and tough clogs from gutters, downspouts and drainpipes. The hose attaches directly to the trigger gun of any Sun Joe electric pressure washer.

This durable hose features an inner liner with Dual-Braid technology braiding steel over polyester. Monster Hose for Pressure Washers is built for use with cold-water pressure washers and handles pressure up to 4,500 psi.

Small, light and simple to install, this high-pressure hose extends the life of your previously purchased Stanley pressure washer and ensures continued excellent performance. This high pressure replacement hose was designed specifically for Stanley or...

Plastic Snap Clamp provides manual shut-off for tubing up to 7/8" ID.