Hay Tools Farm Equipment For Sale In Kansas

The Best Harvest Push Probe Hay Sampler allows you to collect samples from hay bales for testing purposes. Use cleanout rod to push core sample into one-gallon storage bag, eliminating handling and contamination of sample.

Measures a moisture range of 8% - 44%, but is most accurate from 12% - 30%. Within 20 seconds you can use the calibrator clip to calibrate both the electronics and probe sensor. Requires 9-volt battery (not included).

Use cleanout rod to push core sample into one-gallon storage bag, eliminating handling and contamination of sample. The Drill Probe Hay Sampler allows one person to bag multiple hay samples quickly.

The Hot Knife allows for easy removal of twine buildup on bale feeders. Hot Knife has 6" blade and is 110 volt electrically heated.

The change in weight (grams) from the initial sample to the dry sample represents the moisture content. To determine moisture content, sample is weighed and then dried repeatedly until there is no change in the sample weight from one drying to the next.

The Advanced Hay Moisture Tester automatically compensates for the bale density giving more accurate testing results. Specifications: Hay and Haylage: 8% – 80% Straw: 8% – 25% Hay Silage: 30% – 84% Corn Silage: 40% – 76% Alfalfa: 8% – 75% Temperature...

Includes a sturdy carry case with shoulder strap. Higher-frequency, capacitive circuit improves accuracy. Each scale can be adjusted to match your local elevator. Provides you with 16 grain scales and features automatic temperature compensation.

Results can be read in 30-60 seconds. Measures a range of 13% - 70% moisture, within 4% accuracy. Simply add loose hay or forage to a five-gallon bucket and press tester into the hay or forage for measurement.

PTO Size: Small 1000 PTO, Constant velocity driveline, 14Lx16.1 Flotation tires, Hydraulic deflector with 18" wide deflector belt

Remove barbs as needed. Twist the splice until it snaps securely, holding the wire ends together. Do not overlap the fence wire. 1) Pull the fence wire together so that the ends are not more than 1/16” apart.

An out-turned flange holds securely in place. Can save you 75% to 90% of your fence maintenance labor. Mend new and old fence wire in a fraction of the normal time. Use on any kind of wire: New or old, barbed wire, smooth wire, hi-tensile, woven wire,...

Connect your horizontal pipe fence rail to another horizontal pipe rail in your fence line, creating an instant 90 degree angle in your corral or pen. Fits standard pipe fence from 1-5/8" to 1-7/8".

Works like riding on air! The clamp is a pre-formed piece for a 2" round pipe. The 8" tall sturdy metal hub wheel comes with shims for use on gates with less than 1 7/8" O.D. pipe.

SLA0905 Replacement 6v Battery for use with solar energizers.

Splices stay tight even with temperature changes. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Quick and simple way to splice wire - barbed, woven, smooth or high tensile.

Made of hardened steel with rust-resistant finish and ergonomic handles with black insulated grips.

Hinge mounting hardware included. 1-year warranty. Hole provided for securing with chain. Measures 46” x 40” to fit a 48” opening.

Ideal for electric fence repair or construction. Easy to install and stays in place. Solution for terminating wire fencing to T-Post and post fencing systems. Cuts installation time in half and eliminates need for terminal insulator.

Front pulls staples, lifts tugs, and splices wire. Wire stretcher located behind the joint. Starting and pulling point on one jaw with corrugated hammer head on the other. For wood and steel posts.

Connect your horizontal pipe fence rail to a vertical post or pipe anywhere in your fence line, creating an instant 90 degree angle in your corral or pen. Fits standard pipe fence from 1-5/8" to 1-7/8".

Turn clockwise until wire reaches desired tension.

Barbed staples for use with a staple driver.

6-Volt, 12 amp replacement battery for the S40 charger.

To attach rod or pipe fencing to post.

Bolt stretcher together to grip fence. Stretcher consists of two sides that detach and face each other on either side of fence. Easily stretch mesh fencing. Chain is attached to stretcher and used in conjunction with come along to pull fence tight to...

Ideal for all perimeter fences. Can be hand-knotted or crimped. Class 3 galvanized, 180 KSI wire. The standard for both electric and non-electric fences.

Easily slips over T-post, no tools required. Can be used anywhere you can drive a T-post. Speed Brace Fence Brace quickly and easily makes both “H” braces or diagonal braces for permanent or temporary fence.