Agiseek home

Grow Room Ventilation Grow Tents Accessories For Sale In Seattle

Become a Partner
Fin Clamp Baseboard Element for 1 in. Copper Baseboard Piping 1 ft. Section
Prices start at : 40.81 USD / each

Assembled unit installs in seconds. Fin Clamp Baseboard Element is a multi-fin "hinged" hydronic heating element that can be attached to existing hot water or steam pipes. Replace missing fins and increase boiler efficiency.
  • Manufacturer Warranty: 3 month warranty on all parts
  • Product Weight (lb.): 1.63lb
  • Returnable: 90-Day
  • HVAC application: Heating
  • Product Width (in.): 12
  • 3 in. fin will produce 1,665 BTU/lin. ft. of active element: Yes
Washington
Seattle
Inductor 8 in. Corded In-Line Duct Fan
★★★★★
Prices start at : 47.4 USD / each

Corded In-Line Duct Fan is engineered to overcome back pressure and boost air in forced air heating and cooling systems without upsetting the balance in the closed loop system. If you have rooms that are too hot or too cold due to poor airflow, this is...
  • ✓ UL listed E227633 heating and cooling equipment UL 1995 and CSA C22.2 no. 236
  • ✓ 210 CFM free air to maximum boosted air 500 CFM
  • ✓ 6 ft. heavy duty SJT 3 conductor 18-Gauge grounded cord
  • ✓ Installs in any position
  • Manufacturer Warranty: 12 Month Limited Warranty
  • Returnable: 90-Day
Washington
Seattle
60 in. x 30-Gauge ESS Cleat Duct Connector
Prices start at : 4.22 USD / each

30-Gauge ESS cleat for joining Horizontal ends of square or rectangular ducts. Can be used for Remodeling, Do it yourself and New Residential projects. Galvanized sheet metal with hemmed edges for easy installation.
  • ✓ Consult your local building codes for approved installation practices
  • ✓ For joining horizontal ends of square or rectangular ducts
  • HVAC application: All HVAC types
  • Product Height (in.): 1.0
  • Manufacturer Warranty: 1 Year
  • Product Width (in.): 0.25
Washington
Seattle
235 CFM 5 in. Duct Dryer Booster Fan
★★★★★
Prices start at : 191.36 USD / each

VENTS dryer booster fan saves energy by significantly reducing drying time and it reduces lint built up that is potential fire hazard. Boost your dryer performance considerably with VENTS VK 125 PS duct booster fan.
  • ✓ Features UV resistant plastic casing
  • ✓ Booster fan should be at least 15 ft. from the dryer as close as possible where the duct terminates
  • ✓ Exceptional airflow performance even in long duct runs
  • ✓ Consider installing VENTS-LT lint trap that allows you to mount within the 15 ft. minimum distance
  • HVAC application: Ventilation
  • Product Depth (in.): 10
Washington
Seattle
8 in. x 25 ft. Non-Insulated Flexible Aluminum Ducting with Duct Clamps
Prices start at : 23.00 USD / each

3 layers of ultra thick aluminum laminate are included in its composition. Improves efficiency of the air flow. Interlocking steel strips to form an air tight and leak proof system.
  • Certifications and Listings: No Certifications or Listings
  • Product Height (in.): 8.75 in
  • Product Length (in.): 25 ft
  • Insulated: No
  • Fire-resistance coating, strong and flexible: Yes
  • Product Depth (in.): 14 in
Washington
Seattle
3 in. x 25 ft. Flexible Aluminum Foil Duct
★★★★★
Prices start at : 18.43 USD / each

This duct is made of 3 ply aluminum foil laminate with a maximum operating temperature of 250F. Of length allows for longer runs. Flexible aluminum foil duct can be used in a variety of general purpose exhaust applications.
  • ✓ UL 181 listed and marked as a class 1 air connector
  • ✓ Do not use for dryer venting applications
  • Certifications and Listings: 1-UL Listed
  • Product Height (in.): 3.5
  • Returnable: 90-Day
  • Insulated: No
Washington
Seattle
4 in. Plastic Diffuser
Prices start at : 8.92 USD / each

It is suitable for both air intake and exhaust. It has been designed to provide both an unobtrusive appearance that complements any decor and high quality performance. A 100 VR round plastic air diffuser is suitable for 4 in.
  • ✓ Recommended for ceiling application
  • ✓ Delivers supply air in 360° pattern
  • ✓ Diffuser is manufactured of ABS 5VA plastic
  • Product Height (in.): 5.75
  • HVAC application: Ventilation
  • Product Weight (lb.): 0.5lb
Washington
Seattle
20 Amp 2-Pole Definite Purpose Contactor
Prices start at : 8.89 USD / each

Ex9CK series Definite Purpose contactors from Noark Electric provide high performance with both flexibility and reliability. All Ex9CK DP Contactors meet regulatory and compliance industry standards UL recognized and CSA certified for North America and...
  • Manufacturer Warranty: 5-year limited warranty
  • Returnable: 90-Day
  • Product Weight (lb.): 0.695 lb
  • Full load amperage (FLA): 20 Amp: Yes
  • Product Width (in.): 2.21 in
  • HVAC application: All HVAC types
Washington
Seattle
6 in. Corded Duct Fan with More Powerful Motor
★★★★★
Prices start at : 45.11 USD / each

The Inductor DB6GTC 6 in. This fan features a high output motor to help boost airflow in longer duct runs. In-Line Duct Booster Fan is an energy efficient way to help improve comfort in your home or office.
  • ✓ Engineered for maximum boost and quiet operation
  • ✓ Saves on utility bills year round
  • ✓ 1 year limited warranty

6

    • Product Width (in.): 6
    • Brand/Model Compatibility: Ductstat, Suncourt
    • Product Depth (in.): 6
    Washington
    Seattle
    Gas Furnace LP Conversion Kit Access
    ★★★★★
    Prices start at : 73.27 USD / each

    Ensure your KG7S series gas furnace operates safely and efficiently by using the optional Gas Furnace to propane conversion kit. This kit enables conversion of all BTU sizes of KG7S series gas furnaces to LP.
    • ✓ Retain the spring and orifices for Gas Furnace should there be a need to convert back from LP to Gas Furnace in the future
    • ✓ Kit is easy to install and the gas pressure must be adjusted by a certified technician to ensure efficient and proper operation
    • ✓ For installation applications where the altitude ranges from 0 to 10,000 ft.
    • ✓ Kit contains six different sizes of burner orifices, and 3 different gas valve springs, conversion stickers, and installation sheet
    • Product Weight (lb.): 0.4lb
    • HVAC application: Heating
    Washington
    Seattle
    45/5 MFD 370 VAC Round Dual Run Capacitor
    ★★★★★
    Prices start at : 9.81 USD / each

    For heavy-duty continuous applications such as furnace blower motor and condenser fan motors. To prevent shock the capacitor should be discharged before it is removed. Capacitors can hold a charge for long periods of time.

    2.1

      • Product Depth (in.): 2.1
      • Product Width (in.): 2.1
      • Quad blade quick connect terminals: Yes
      • Brand/Model Compatibility: Fits most brands
      • Product Height (in.): 5.6
      • Product Weight (lb.): 0.55lb
      Washington
      Seattle
      40/5 MFD 370 VAC Oval Dual Run Capacitor
      ★★★★★
      Prices start at : 7.57 USD / each

      For heavy-duty continuous applications such as furnace blower motor and condenser fan motors. To prevent shock the capacitor should be discharged before it is removed. Capacitors can hold a charge for long periods of time.
      • ✓ Hermetically sealed
      • ✓ Round dual 370 VAC
      • Manufacturer Warranty: Limited 1 Year
      • Product Height (in.): 4.8
      • Product Width (in.): 1.8
      • HVAC application: All HVAC types
      Washington
      Seattle
      Range Hood Wall-Hanging Bracket Kit
      ★★★★★
      Prices start at : 14.77 USD / each

      The Broan Model 35 Range Hood Wall-Hanging Bracket Kit is used for mounting your range hood to a wall. In some places, it cannot be hung from overhead cabinets. It is designed to remain invisible by fitting inside the range hood.
      • ✓ Kit for mounting range hood to wall when not hung from overhead cabinets
      • ✓ Designed to fit inside range hood for invisible appearance
      • Number of pieces included: 2.0
      • Certifications and Listings: No Certifications or Listings
      • Product Height (in.): 5.5 in
      • Manufacturer Warranty: None
      Washington
      Seattle
      Control Board for Air Handler/Electric Furnace
      Prices start at : 116.7 USD / each

      Using the OEM replacement parts ensures that your equipment will be operating properly at the manufacturer's tested specifications. This replacement control board is designed for use in air handlers and electric furnace applications with and without an...
      • ✓ Designed to be used for cooling only and heating/cooling applications
      • ✓ Control board has a built-in self diagnostic control to simplify troubleshooting
      • ✓ Electric heat kit wiring harness plugs into the control board to simplify installation
      • HVAC application: All HVAC types
      • Returnable: 90-Day
      • Manufacturer Warranty: 1 Year Warranty
      Washington
      Seattle
      Gas Conversion Kit from Natural Gas to LP Gas
      ★★★★★
      Prices start at : 63.75 USD / each

      The Williams Furnace Co. LP Gas Conversion Kit for the Williams Natural Gas Furnace Model #1403622 includes instructions, a conversion certificate and labels. The kit contains the necessary components for converting the Williams Natural Gas Furnace (model...
      • ✓ Includes easy-to-follow instructions
      • ✓ Includes conversion certificate and labels

      6 in

        • Product Width (in.): 6 in
        • Manufacturer Warranty: Refer to Williams' "Limited Warranty" for details.
        • HVAC application: Heating
        • Product Depth (in.): 6 in
        Washington
        Seattle
        Aluminum Flat Roof Cap for 8 in. Round Duct
        Prices start at : 50.11 USD / each

        Can be used with up to 8 in. If curb currently exists on the roof, use the Broan 611 Roof Cap. Aluminum with a natural finish, it includes a built-in bird screen. Made of 0.025 in.
        • ✓ Built-in bird screen to help protect your ducts from animal entry
        • ✓ Helps vent air from your range hood to the outdoors for improved air circulation
        • Hardware Included: No
        • Product Width (in.): 15 in
        • HVAC application: Ventilation
        • Brand/Model Compatibility: Broan, NuTone
        Washington
        Seattle
        Hot Surface Ignitor, Silicon Carbide
        Prices start at : 24.15 USD / each

        This silicon carbide ignitor provides a highly reliable ignition source. The Emerson 767A-370 Hot Surface Ignitor features 5.25 in. This ignitor has a lead insulation temperature rating of 200-degree celcius.
        • ✓ Reliable ignition source
        • ✓ 5.25 in. lead length
        • ✓ 200° insulation
        • Product Weight (lb.): 0.2418lb
        • HVAC application: Heating
        • Manufacturer Warranty: N/A
        Washington
        Seattle
        Universal Heavy-Duty Air Conditioner Support
        ★★★★★
        Prices start at : 40.98 USD / each

        Optimize the safety of your air conditioner installation with the Universal Heavy-Duty Air Conditioner Support. The support holds up to 160 lb. And is made of heavy-gauge, epoxy-coated steel.
        • ✓ Nylon fixtures and neoprene rubber mounting pads
        • ✓ Stainless-steel hardware
        • ✓ Supports up to 160 lb.
        • ✓ Compatible with 4 - 11 in. thick walls
        • Product Weight (lb.): 2.75lb
        • Brand/Model Compatibility: Most
        Washington
        Seattle
        VENTS 678 CFM Power 10 in. In-Line Centrifugal Metal Duct Vent Fan
        ★★★★★
        Prices start at : 220.28 USD / each

        The quiet and efficient backward curved impeller is capable of operating in high pressure systems. The most common uses are bathroom exhaust, range hood exhaust and duct boosting. VKM 250 fan is designed to boost airflow through long or complex duct runs...
        • ✓ Ideal for long duct runs
        • ✓ Pre-wired and supplied with mounting bracket for easy installation
        • Material: Galvanized Steel
        • Color Family: Blue
        • Product Width (in.): 15.38
        • Product Weight (lb.): 16.10lb
        Washington
        Seattle
        10 in. Vertical Discharge In-Line Damper
        ★★★★★
        Prices start at : 52.37 USD / each

        Vertical Discharge In-Line Damper is intended for use in vertical duct segments. It also minimizes backdrafts while allowing maximum exhaust flow. It enables the proper operation of damper flaps.
        • ✓ 10 in. round damper with aluminum flaps minimizes backdrafts while allowing maximum exhaust flow
        • ✓ Designed to slide into standard 10 in. round duct for easy installation
        • Hardware Included: No
        • Compatible Appliance Type: Range Hood
        • Product Depth (in.): 1.13 in
        • Product Height (in.): 9.88 in
        Washington
        Seattle
        4 in. x 8 ft. Semi-Rigid Aluminum Duct
        ★★★★★
        Prices start at : 10.98 USD / each

        It can also be used for bathroom fan venting. This duct is totally noncombustible and has a maximum operating temperature of 435F. Semi-Rigid Aluminum Duct is ideal when all aluminum duct is required by code in some gas and electric dryer applications.
        • Maximum air flow (CFM): 0
        • Material: Aluminum
        • Certifications and Listings: No Certifications or Listings
        • Product Width (in.): 4.25
        • Color: silver
        • Insulated: No
        Washington
        Seattle
        8 Amp 230-Volt Vari-Speed Motor Control
        Prices start at : 86.1 USD / each

        This variable speed motor control contains an On/Off line switch and a high gain RFI noise suppression filter. Suitable for motors up to 8 Amp 230-Volt. Applications include range hoods, vibrators, humidifiers, fireplace blowers, fans, laminar flow hoods,...
        • ✓ Minimum speed trimmer
        • ✓ RFI filter
        • Manufacturer Warranty: 1 year
        • HVAC application: Ventilation
        • Product Width (in.): 3 in
        • Product Weight (lb.): 1 lb
        Washington
        Seattle
        40 Amp 2-Pole Definite Purpose Contactor
        Prices start at : 11.34 USD / each

        Ex9CK series Definite Purpose contactors from Noark Electric provide high performance with both flexibility and reliability. All Ex9CK DP Contactors meet regulatory and compliance industry standards UL recognized and CSA certified for North America and...
        • ✓ Resistive amperage (RA): 50 Amp
        • ✓ Full load amperage (FLA): 40 Amp
        • Manufacturer Warranty: 5-year limited warranty
        • Product Height (in.): 2.96 in
        • HVAC application: All HVAC types
        • Product Weight (lb.): 0.695 lb
        Washington
        Seattle
        188 CFM Power 5 in. Quiet Energy Efficient Metal Mixed Flow In-Line Duct Fan
        Prices start at : 179.46 USD / each

        TT Silent M 125 combines the features and benefits of axial and centrifugal fans. TT Silent M 125 was engineered to be compact without any loss of performance. Used for both supply and exhaust applications that require powerful airflow.
        • ✓ ETL certification ensures you of product quality and safety
        • ✓ Quiet operation: 0.1 - 0.2 sones to assure your highest comfort
        • ✓ Durable metal noise absorbing case
        • ✓ Rotary and removable central body allows easy installation and maintenance that maximizes your savings
        • ✓ Power cord included to simplify use
        • Product Width (in.): 20.25
        Washington
        Seattle
        5.38 x 30.37 in. Air Deflector (4-Pack)
        Prices start at : 130.00 USD / carton

        TAYMAC Air Deflectors save energy and add comfort by redirecting the flow of air throughout the room. Fits Friedrich models and other similar units. Easy to install.
        • ✓ Designed to save energy and add comfort
        • ✓ Includes mounting hardware
        • ✓ Clear
        • ✓ Easy to install
        • Product Width (in.): 30.5
        • HVAC application: Ventilation
        Washington
        Seattle
        48 in. x 30-Gauge ESS Cleat Duct Connector
        ★★★★★
        Prices start at : 3.94 USD / each

        30-Gauge ESS cleat for joining Horizontal ends of square or rectangular ducts. Can be used for Remodeling, Do it yourself and New Residential projects. Galvanized sheet metal with hemmed edges for easy installation.
        • ✓ Seal joints with approved duct mastic sealants
        • ✓ For joining horizontal ends of square or rectangular ducts
        • Returnable: 90-Day
        • Brand/Model Compatibility: Speedi-Products
        • Product Height (in.): 1.0
        • Product Weight (lb.): 0.75lb
        Washington
        Seattle
        Universal Hot Surface Nitride Igniter
        ★★★★★
        Prices start at : 60.08 USD / each

        Upgrade from silicon carbide to the long-lasting and durable nitride igniter. This igniter replaces over 100 silicon carbide ignitors found on gas-fired furnaces, water heaters, and boilers.
        • ✓ Mounting adaptor bracket simplifies installation
        • ✓ Weil McLain: 511-330-139, 511-330-188, 511-330-190, 511-330-193 Williamson: 9050 York/Luxaire/Winchester: 025-27766-000, 025-27774-000, 025-29043-000, 025-29050-000, 025-32625-000
        • ✓ Carrier Corporation: LH33ZS001(A), LH33ZS002(A), LH33ZS003(A), LH33ZS004 Claire Brothers: C-238, C-242 Coleman: 1474-051, 1474-052 Comfort Maker: 1096048 Comfort Zone: 150114-04-01
        • Manufacturer Warranty: 3 years
        • Brand/Model Compatibility: Universal design to replace over 100 silicon carbide igniters from gas-fired forced air furnaces, water heaters, and boilers. See listing below.
        • Product Weight (lb.): 0.1lb
        Washington
        Seattle
        Agricultural market place, farms, farmers, land