Grow Light Kits Plant Lights Kits For Sale In Minnesota

Electronically ballasted lighting systems generate roughly 30% more PAR (photo synthetically active radiation) for every-Watt of electricity consumed compared to the magnetic (core and coil) ballasts of the past.

Can be controlled by Timer. Specifications: replaces a 600-Watt MH. Item weight: 13.3 lbs. Indoor use only, not water-proof. Power Cord (US Standard 110-Volt grounded 3 prong plug).

This fixture can be hung horizontally or vertically, 8 x 6400K HO bulbs included, slotted housing for optimal cooling, runs on 120-Volt. Includes FREE pair of rope hangers. 40,000 total Lumen in the blue spectrum is perfect for propagating seedlings,...

Can be controlled by Timer. Specifications: replaces a 600-Watt HPS/MH. Item weight: 13.3 lbs. Indoor use only, not water-proof. Power Cord (US Standard 110-Volt grounded 3 prong plug).

Each T5 grow light comes complete with fixtures, bulbs, bracket, jump cords and light ratchet hangers. Each T5 HO light fixture boasts a 6500K spectrum while the 2 ft. The ViaVolt T5 Grow light with bracket and light hanger is available in both 2 ft.

Features built-in digital ballast designed specifically to run two 315-Watt ceramic metal halide lamp (dual lamp), which in this system operates in the horizontal position. Easy mounting options and power coated exterior.

At 5,000-Lumen and 54-Watt, the High Output T-5 boasts itself as the strongest fluorescent lighting around. 2 Bulbs T5 High Output Fluorescent Grow Light made for plant propagation mounted on the Steel White Powder Coated Light Stand.

Ceramic Metal Halide lamps offer a spectrum and CRI that closely resembles natural sunlight over any other form of lighting available on the market, they also have increased PAR/Watt efficiency leading to better quality while using significantly less...

The propagation light stand is made of durable steel that is white powder coated and rust resistant for use in humid greenhouse environments. This unit includes wire cables and hardware for hanging and adjusting.

Socket type: E39 Mogul Base. Metal hangers included (set of 2). Cool Tube with 2X-Large Wing: Size: 42 in. Material: Reflective aluminum metal. Duct Size: 8 in. Hydro Crunch 8 in. Our reflectors allow your grow lights to be distributed evenly.

DE technology has been rated as the most efficient lighting option by independent university researchers. Growers are able to achieve higher yields, better quality and increased light penetration all for the same electrical consumption as older traditional...

When used in conjunction with a compact fluorescent bulb, the reflector will help direct light toward the plant canopy where it's needed most. This reflector is ideal for compact fluorescent bulbs that require a 5KV socket.

Electronically ballasted lighting systems generate roughly 30% more PAR (photo synthetically active radiation) for every watt of electricity consumed compared to the magnetic (core and coil) ballasts of the past.

Duct Size: 6 in. Comes with pre-installed E39 Mogul bulb socket with 15 ft. Lamp cord: industry standard S-plug pre-installed ceramic socket. Metal hinge latch feature for easy changing of lamps.

Features built-in digital ballast designed specifically to run the 315-Watt ceramic metal halide lamp, which in this system operates in the vertical position. Easy mounting options and power coated exterior.

1 Bulb T5 High Output Fluorescent Grow Light made for plant propagation. At 2,000 lumens and 24-Watt, the High Output T-5 boasts itself as the strongest fluorescent lighting around.

Features hinged tempered glass that closes onto rubber gaskets. (vent to vent). Lamp cord: industry standard S-plug pre-installed ceramic socket. Metal hinge latch feature for easy changing of lamps.

It is best to use HPS Grow Lights for the fruiting and flowering phase of plant growth or in a 4:1 ratio of HPS to MH for best results. High Pressure Sodium light helps stimulate flower and fruit production in plants more efficiently than other light...

Controls cycles as long as 23 3/4 hours, or cycles as short as 15 minutes. The ViaVolt Electronic Grow Light Ballast has an internal resin coating for extra protection and longer ballast life and an external circuit breaker to prevent damages.

The reflector comes pre-wired with a 5KV socket which will accommodate HID bulbs (both HPS and MH). This inexpensive grow light reflector will help direct light toward the plant canopy where it's needed most.

1 Bulb 18-Watt High Output 5500K LED Grow Light made for plant propagation. With 25% more light and 33% energy saving over T5 fluorescent bulbs this grow light is a real value. At 2,250 lumens and 18-Watt, the High Output T-5 LED boasts itself as the...

20,000 total lumens in the blue spectrum is perfect for propagating seedlings, clones, or keeping plants happy year round. Perfect for use with pumps regulating water use, propagation grows lights and more.

We have included a commercial grade Double-Ended (CMH) ceramic metal halide lamp rated for 10,000-hour of use with an initial output of 78,500-Lumen. Ceramic Metal Halide lamps offer a spectrum and CRI that closely resembles natural sunlight over any...

Digital ballasted lighting systems generate roughly 30% more PAR (photo synthetically active radiation) for every watt of electricity consumed compared to the magnetic (core and coil) ballasts of the past.

1 Bulb T5 High Output Fluorescent Grow Light made for plant propagation. At 2,000 lumens and 24-Watt, the High Output T-5 boasts itself as the strongest fluorescent lighting around.

The 6-inch Cool Tube with Hood grow light reflector comes with a pebbled, polished reflector for ultimate dispersion and reflectivity and can be air cooled allowing you to reroute unwanted heat out of the growing area using 6 in.

The ViaVolt 150-Watt grow light plugs into any standard grounded outlet or timer. This grow light is perfect in applications where there is either no naturally occurring light, or where supplemental light is required.