Includes a 3 ft. Includes a 3-year manufacturer's no hassle warranty. Rated for 15 amps @ 120 volt. External temperature probe that is accurate and reliable • Controls separate day and night time temperatures Instruction Manual (PDF) Grower's Tip: This...
With the quick-connect system, installation takes seconds, but standard connections are also available. Pre-charged line set w/ quick connect fittings and insulation cover, indoor wall mount, remote, 3 in.
It is perfect for controlling humidity at night using a dehumidifier or for a separate heater. Supplemental CO2 is coordinated to work in harmony with your exhaust fan's temperature and humidity control functions.
Includes an 8 ft. For grow room ventilation, it doesn't get any better than Active Air! These powerful Inline Fans by Hydrofarm offer performance and super-quiet operation. Power cord and mounting brackets.
Skip the massive hassle and expense of ductwork and installation! The Active Air Portable Air Conditioner is an excellent choice for small-space indoor gardens (maximum 100 sq. H; shipping weight 79.5 pounds – 11.7 amps / 1340 watts Includes: built-in...
Made in the USA. Features: • Designed to work with any control device that is 120v • Includes a tank pressure gauge to indicate remaining pressure • Ships with a solenoid valve, 6 ft.
Two (2) per pack. (150 lbs total) DIRECTIONS FOR USE: Attach the clip to your reflector and pull the free end of rope to desired length. — so the pair can handle up to 150 lbs. It's that easy! Each 6-foot braided cord holds 75 lbs.
Choose different day and night temperatures automatically maintained by the built-in photocell. Control cooling or heating within your growing environment with the Autopilot Cooling Thermostat (APCET).
Available Sizes: 4-inch, 518 Max CFM 6-inch, 942 Max CFM 8-inch, 2000 Max CFM 10-inch, 3000 Max CFM 12-inch, 4000 Max CFM Grower's Tip: Charcoal fiber filters need regular maintenance to function properly.
It is also very effective in large areas where strong and problem odors are present. ONA Storm is specifically designed to be used with the large capacity 5 Gallon (20 liter) ONA Gel pails.
Galvanized steel construction with attached PVC fitting. Drain pans collect condensation to prevent leakage in walls and ceilings due to moisture run-off from primary AC pans. Locate under HVAC unit and attach to 3/4 in.
✓ 26 gauge
✓ Folded corners
HVAC application: All HVAC types
Returnable: 90-Day
Manufacturer Warranty: Free from Manufacturer Defect at Time of Delivery.
UL file number E12139 CSA file number LR13360. Used for switching Solenoids, fan motors and general purpose switching. Enclosed fan relay type 84, 24V coil, SPDT.
✓ Switch action single pole, double throw
✓ Coils frequency = 50/60 HZ
Product Width (in.): 2.3
Product Weight (lb.): 0.2lb
HVAC application: All HVAC types
Brand/Model Compatibility: RBM Type & White Rodgers
The kit also has specially designed diverters and reducers to move air efficiently. Filters help to trap and reduce cooking odors. The Broan RK54 Non-Ducted Recirculation Kit for E54000 Series Island Hoods features replaceable charcoal filters.
Certifications and Listings: No Certifications or Listings
It evenly distributes conditioned air throughout the room. It is recommended for ceiling applications and suitable for both air intake and exhaust. VENTS A 200/150 VRF plastic diffuser is a decorative alternative to standard rectangular vents.
This silicon carbide ignitor provides a highly reliable ignition source. Leads, 200 insulation, and electrical connection receptacle with .093 in. The Emerson 767A-361 Hot Surface Ignitor features 5.25 in.
✓ Has a lead insulation temperature rating of 200 degrees Celsius
✓ Electrical connection receptacle with .093 in. male pins
Now, those challenges have 1 reliable solution: Glowfly from Honeywell. Replacing a hot surface igniter can be a tricky job. The Q3200U Universal Hot Surface Igniter Kit is designed to provide a robust field service replacement igniter, in gas fired appliances...
✓ Robust silicon nitride igniter construction
✓ Each igniter package includes cross reference instructions, 6 brackets, and installation accessories
KOM 125 U round back valve is especially designed to prevent back-draft. The spring loaded back-draft damper is manufactured of galvanized steel and contains rubber seal. Easily fits into your vent system, the installation requires minimal labor and time.
✓ Rubber gasket in closed position ensures minimal leakage
Galvanized steel construction with attached PVC fitting. Drain pans collect condensation to prevent leakage in walls and ceilings due to moisture run-off from primary AC pans. Locate under HVAC unit and attach to 3/4 in.
✓ Galvanized steel
✓ Folded corners
✓ PVC fitting with 3/4 in. female PVC slip (assembly required) is located on 16 in. side of Drain Pan
For gas or oil furnaces and heaters. 3000 RPM Speed rating. Clockwise shaft end rotation. Specific purpose blower with sleeve bearings. Sleeve bearing. This aftermarket replacement is Thermally protected.
Non combustible corrugated continuous lock seam. Speedi-Products 4 in. Can be used for remodeling, do it yourself and new residential projects. Round aluminum flex pipe. Used in non insulated general purpose venting systems.
Ideal for non insulated general purpose venting systems: Yes
Certifications and Listings: No Certifications or Listings
Designed to fit a variety of Hearth heaters. Ideal for larger rooms where faster heat is desired. Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort.
Product Height (in.): 10
Manufacturer Warranty: Refer to Williams' Limited Warranty for details
Product Depth (in.): 17
Product Weight (lb.): 9lb
Fits model size 3501522, 5001522, 6501522, 3502522, 5002522 and 6502522: Yes
This duct is UL2158A listed for safe dryer venting. It is constructed of heavy duty, fire resistant, aluminum foil laminate. This Dryer Vent Duct is ideal for both gas and electric dryer applications.
✓ Duct will not support combustion
✓ Constructed with a high density, corrosion resistant, wire helix
The molding kit is a perfect solution and can be used with any 42 in. For a superior look and to hide any construction imperfection, use wall sleeve molding kit to trim the wall sleeve to the wall.
✓ Built to withstand the toughest climate conditions
✓ Strong and durable construction
✓ Enhance the appearance of any building appearance
The AC Guard security cage is the only unit in the market that covers 95% of condensers. The cage is powder-coated for a long-lasting, beautiful finish, and it is easily removable for maintenance.
✓ Model covers 95% of condensers
✓ Very pleasing appearance
✓ Powder-coated for durability
Product Width (in.): 51
Product Height (in.): 59
Brand/Model Compatibility: AC GUARD'S SECURITY CAGE IS THE ONLY CAGE IN THE MARKET THAT ADJUST TO FIT 95% OF THE CONDENSERS IN THE MARKET PLACE AND SHIPS FLAT IN A BOX
40 PVC vent pipe using 4 in. Of clean, size 4-6 gravel and is ideal for both new construction and retrofit radon systems Choosing this fan offers the capability of moving about 100 CFM more air than the RP145 in soil with similar tightness.