Agiseek home

Forklift Attachment Regulations

Become a Partner
Stabilvac 6000 Monoblock Regulator
Prices start at : 412.85 USD / each

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg...
  • Weight: 3 lbs
Arizona
Chino Valley
Sentinel Model 100 Vacuum Regulator
Prices start at : 945.09 USD / each

1.5" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...
  • Weight: 4 lbs
Arizona
Chino Valley
Stabilvac 3600 Monoblock Regulator
Prices start at : 220.84 USD / each

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36...
  • Weight: 3 lbs
Arizona
Chino Valley
Safety Valve f/ Stabilvac Monoblock Regulator
Prices start at : 199.34 USD / each

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.
  • Weight: 1 lbs
Arizona
Chino Valley
Digimet Printer
Prices start at : 530.67 USD / each

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.
  • Weight: 3 lbs
Arizona
Chino Valley
Stabilvac 6000 Separate Regulator
Prices start at : 482.10 USD / each

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...
  • Weight: 3 lbs
Arizona
Chino Valley
Noise Suppressor f/ Sentinel MKI, MKII
Prices start at : 284.82 USD / each

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
  • Weight: 10 lbs
Arizona
Chino Valley
Foam Filter f / Coburn Vacuum Regulator
Prices start at : 2.36 USD / each

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.
  • Weight: 0.05 lbs
Arizona
Chino Valley
Sentinel Model 350 Vacuum Regulator
Prices start at : 1068.67 USD / each

3" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...
  • Weight: 20 lbs
Arizona
Chino Valley
Noise Suppressor f/ Sentinel M100
Prices start at : 292.22 USD / each

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
  • Weight: 10 lbs
Arizona
Chino Valley
Small Relief Valve for MarkII
Prices start at : 124.80 USD / each

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.
  • Weight: 0.25 lbs
Arizona
Chino Valley
Stabilvac 1500 Monoblock Regulator
Prices start at : 188.44 USD / each

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36...
  • Weight: 1 lbs
Arizona
Chino Valley
Noise Suppressor f/ M350 & M500
Prices start at : 295.92 USD / each

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
  • Weight: 10 lbs
Arizona
Chino Valley
Diaphragm for Sentinel Model 100
Prices start at : 54.38 USD / each

Part number "353-06" on schematic diagram.
  • Weight: 1.25 lbs
Arizona
Chino Valley
Replacement Top Dome Filter for Sentinel 100 & 350
Prices start at : 64.95 USD / each

Part number "348-36" on schematic diagram.
  • Weight: 1.15 lbs
Arizona
Chino Valley
Coburn Vacuum Regulator
Prices start at : 199.75 USD / each

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .
  • Weight: 2.5 lbs
Arizona
Chino Valley
Sentinel Mark II Vacuum Regulator
Prices start at : 225.30 USD / each

2" Female NPT mounting connections. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". Overall dimensions 6" in diameter and 11-1/4" high.
  • Weight: 2 lbs
Arizona
Chino Valley
200 Micron Mesh Replacement Filter
Prices start at : 8.50 USD / 1 Each

Replacing the filter on your drip irrigation system is highly recommended before each season. Irrigation filters can wear out and break down over the course of the season, allowing larger particles to pass into your drip tape and plug the emitters.
New York
Rochester
Filter Replacement Cartridge 348-33 for Sentinel
Prices start at : 8.80 USD / each

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.
  • Weight: 0.75 lbs
Arizona
Chino Valley
Sentinel Model 500 Vacuum Regulator
Prices start at : 1158.82 USD / each

3" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features...
  • Weight: 20 lbs
Arizona
Chino Valley
Repair Kit for Fullwood/BM Regulator
Prices start at : 39.91 USD / each

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.
  • Weight: 0.63 lbs
Arizona
Chino Valley
Complete Digimet 3000--English
Prices start at : 1862.27 USD / each

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...
  • Weight: 1.5 lbs
Arizona
Chino Valley
Stabilvac 4000 Separate Regulator
Prices start at : 401.00 USD / each

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...
  • Weight: 3 lbs
Arizona
Chino Valley
Safety Valve f/ Stabilvac Separate Regulator
Prices start at : 199.34 USD / each

Safety Valve for Stabilvac Seperate styles.
  • Weight: 1 lbs
Arizona
Chino Valley
Relief Valve 1\
Prices start at : 57.89 USD / each

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.
  • Weight: 1 lbs
Arizona
Chino Valley
Relief Valve f/Sentinel 100 & 350
Prices start at : 161.66 USD / each

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram.
  • Weight: 1 lbs
Arizona
Chino Valley
API Irrigation Filter with Flush Valve
Prices start at : 23.95 USD / 1 Each

Main line systems by using a ¾ in. Filter can be used with 1 in., ¾ in., and ½ in. Female to tape lock adaptor (items 40193, 40194, 40195). Filter housing comes with filter. Having a filter on your drip irrigation system is highly recommended as filters...
New York
Rochester