Fence Accessories Livestock Supplies For Sale In Tempe

Test voltage under "load" on your fence. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price. For use with all fence energizers.

Bolt measures 6” (measured from the 90 degree angle to the point of bolt.) Used with Hot Rope or polywire to turn corners or as an end insulator.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

Strongest, long-term, end-strain insulation for high tensile permanent electric fencing. 10-year warranty.

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts. Absorbs up to 34 watts of transient power. Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes.

Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world.

A significant change in current ampere readings between one point and the next indicates the presence of a fault between these two points. Unit can be used with or without sound setting, which rises in pitch with the magnitude of the current pulse.

Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts.

Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. May be used to terminate the rope at the end of the fence. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

Vinyl sleeves slip over T-posts for safety and appearance. Complete with cap.

Fits the 13-19' and 18-24' gate.

Dimensions 11.5" x 12.75"

Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter. Fits Ring Top Post (#40990).

One-handed operation. Prevents gate end from sagging and can be opened from horse-back.

Made from 1/4” spring steel. Fence compression spring is used to determine wire tension on your fence line. Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension.

It powers up to 10 miles or 40 acres of electric fencing. Comes with a two-year warranty that includes lightning. * Requires 10-watt panel to run off of solar. The Speedrite 1000 is a 1 joule dual purpose energizer.