Fence Accessories Livestock Supplies For Sale In New Jersey

Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. May be used to terminate the rope at the end of the fence. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

12-tooth spool for fine adjustment, robust, high-quality, spring-loaded locking clip. The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire.

Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts. Absorbs up to 34 watts of transient power. Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes.

For use with these energizers: S10, S16, S22, and B700.

Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops. Protect your valuable horses and livestock from serious injury and unsightly scrapes.

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid.

Connects to an end tensioner to open gate.

Nylon snap-on clip insulators for use with the Insulated Line Post.

Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.

Multi-mode fault finding tool: Current Meter and Digital Volt Meter (DVM) Convenient pocket size Water-resistant and impact-resistant case Large easy-to-read LCD display Long life battery - up to 3 years Auto ON/OFF.

Pig tail clips may be used instead of insulators. Stainless steel clips for use with 3/8" or 1/2" fiberglass posts.

Easy to repair. Should a strand break, simply change out the tape. All-in-one multi-strand electrification gate. Quick and easy to install from one wood post to another. Highly flexible gate width, perfect for whatever space you need.

Fits Ring Top Post (#40990). Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter.

Can be tightened with a 1/2” drive ratchet. This tightener is installed without having to disconnect the end of the fence. Not for use with coated wire. This powder-coated, white, aluminum tightener is best for use with rope or light-gauge wire.

Holds cattle, hogs, sheep and horses like an electric fence. No more opening and closing gates. Easy to install. Metal never touches the tractor or vehicle, as it is covered by the fiberglass/polyethylene.

Fits gates with 1-5/8" - 2" O.D. round tube. Designed to make opening and closing a gate an easy task.

Replacement stainless steel K-clips for the Fence Flag (#24135) operation.

Uses very little voltage off of fence when Knocker spark gap is adjusted correctly. Made in Cookeville, TN, USA This product requires a Spark Gap Adjustment before working properly.

Stainless steel contacts. Hardware not included. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks.