Fence Accessories Livestock Supplies For Sale In Atlanta

For use with ground rods for proper electric fence grounding.

Helps absorb expansion and contraction of the fence wire. Fence compression spring is used to determine wire tension on your fence line. Made from 1/4” spring steel. Spring is 1 1/2” diameter, expands from 9” to 18”.

Connect and transfer power from 1 strand of 1/4” electric rope or braid to another. May be used to terminate the rope at the end of the fence. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire.

Connects to an end tensioner to open gate.

No wire tying or special tools required. Fits up to 8" post. Long-life Super Strain Insulator with pre-attached stainless steel cable. 10-year warranty.

Fits the 13-19' and 18-24' gate.

Used with Hot Rope or polywire to turn corners or as an end insulator. Bolt measures 6” (measured from the 90 degree angle to the point of bolt.)

This latch allows you to open the gate from either direction. (the only drawback was it did not come with the second bolt or any of the nuts to attach it to the gate. This latch is made to last! I installed it on an indoor stall area for some future Alpacas...

Suitable for use with any model or brand of low impedance fence charger that has 1 joule or greater output. When a Storm Guard Module is in use, it can absorb this surge and fail, instead of causing failure to your fence charger.

The splicers work perfectly-- never had a problem with them. The fence stays together even when crows choose to rest on the wire, and when it rains and storms and gets windy, etc. I purchased these polytape splicers at the beginning of summer to use on...

Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed or seen during hours of darkness. Starts working when your fence stops. When voltage drops, fence alert flashes to notify you of problems.

In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding. Recommended for high tensile wire use (usually 12.5 gauge wire).

Connect a fence energizer to 1/4” electric rope or braid. May also be used to terminate the rope at the end of the strand. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire.

This sensitizes the spark gap with your entire fence, and if something touches the fence, the Knocker spark gap will disengage and the full shock of the charger will go to whatever is touching your fence.

Easily attaches up to 2" to transfer power from the charger to the fence line. 36" wire with terminal ring attached.

See more videos here. Close new tab or window to continue shopping. This will open a new website in a new window or tab.

This product requires a Spark Gap Adjustment before working properly. Great for remote locations and easy to install. Made in USA, Cookeville, TN. Can be mounted on top of a wooden post or on T-post using our special T-post Bracket (item #EFLAE) which...

Carry one tool instead of two. In place of the old ribbed flat end, there is a real hammer head to save you time and effort. These easy-to-open pliers are capable of cutting and crimping wire as well as nailing on insulators and staples.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

(It is not recommended to use the Powder Creek gates in any high pressure cattle working environment.) Weighs 108 lbs. Durable hunter green powder coat finish. With the minimum purchase, your order will ship directly to you by the manufacturer using their...

Gallagher S16 Solar Fence Charger will power up to 30 acres/10 miles single wire with no vegetation or 1 mile/10 acres multi-wire fencing with some vegetation. Free Gallagher Ball Cap With purchase of any Gallagher Energizer.