Agiseek home

Farm Implements Farm Livestock For Sale In Denton

Become a Partner
Cross & Bearing Repair Kit - Series 12
Prices start at : 12.99 USD

  •  Weight: Approximately: .84 pounds
  •  Snap ring located in bushing
  •  This product cannot be shipped to: CA
  •  Made in the USA
  •  Includes bushings, retainers, center cross, washers & lube fittings
  •  Mfr. item # 200-1200
Texas
Denton
Hydraulic Adapter - 8MB x 6FPX 90-Degree
Prices start at : 5.79 USD

  •  Weight: Approximately: .31 pounds
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 4 x 3 x 2 inches.
  •  1/2 in. male boss x 3/8 in. female pipe 90 degree swivel
Texas
Denton
Restricted Hydraulic Adapter - 6MP x 6FPX
Prices start at : 5.29 USD

  •  This product cannot be shipped to: CA
  •  Small opening reduces the amount of fluid through the line
  •  1/32 in. restricted
  •  Gives hydraulic system a more controlled application
  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
Texas
Denton
Harrow Teeth - JD1B-1
Prices start at : 6.99 USD

  •  Weight: Approximately: 2.18 pounds
  •  Shipping Dimensions: Approximately 14.75 x 7.7 x 2.5 inches.
  •  Made in the USA
Texas
Denton
NH Steel Baler Tooth - NH-1D
Prices start at : 2.89 USD

  •  Weight: Approximately: .48 pounds
  •  Shipping Dimensions: Approximately 7.6 x 2.8 x 1.7 inches.
  •  Fits New Holland 660, 845, 846, 847, 850, 851 & 852 Supersweep and large round balers
  •  0.187 wire
  •  Replaces part #131673
Texas
Denton
1/16 in x 1-9/16 in Yellow Chromate Hair Pin - 10 Pk
Prices start at : 0.89 USD

  •  Fits 3/8 in to 1/2 in shaft diameter
  •  Used in farm, lawn and garden and other applications to secure attachments and pins
  •  This product cannot be shipped to: CA
  •  Yellow chromate finish
  •  Shipping Dimensions: Approximately 4.88 x 3.88 x .5 inches.
Texas
Denton
23 Pc Grease Fitting Assortment Set
Prices start at : 9.89 USD

  •  Weight: Approximately: .31 pounds
  •  23 piece set includes an assortment of 8 sizes
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 6.5 x 3.75 x 1 inches.
Texas
Denton
Harrow Tine - LN-1
Prices start at : 2.99 USD

  •  Replaces OEM L-14-04728
  •  This product cannot be shipped to: CA
  •  Made in the USA
Texas
Denton
Tongue Jack Caster w/ 6 in Wheel & Pin/Clip
Prices start at : 19.99 USD

It is simple to install but it should have washers on the sides of the wheel. The plastic scrapes and gets cut away by the sharp metal edge that it rubs against. It appears to flex a lot also without being under max tongue load.
  •  6 in polyurethane wheel
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 10.92 x 8.45 x 3.25 inches.
  •  For use with 2,000-5,000 lb jacks
  •  5-year limited manufacturer's warranty
  •  Zinc finish
Texas
Denton
Replacement Punch For A-8050
Prices start at : 7.99 USD

  •  Shipping Dimensions: Approximately 9 x 7 x 3 inches.
  •  This product cannot be shipped to: CA
  •  Made in the USA
Texas
Denton
Bolt-On Fasteners - 904-500
Prices start at : 9.99 USD

  •  Mfr. part number - 904-500
  •  Weight: Approximately: .925 pounds
  •  This product cannot be shipped to: CA
  •  Made in the USA
  •  Shipping Dimensions: Approximately 4.4 x 2.75 x 1.25 inches.
Texas
Denton
PTO Round-Loop Zinc-Plated Locking Pin - 2 Pk
Prices start at : 1.69 USD

  •  Weight: Approximately: .2 pounds
  •  Shipping Dimensions: Approximately 4.75 x 2.5 x 1 inches to 4.75 x 3.5 x 1 inches depending on size selected.
  •  Model # S070938ZBU
  •  This product cannot be shipped to: CA
Texas
Denton
Hydraulic Adapter - 8MB x 8MP
Prices start at : 3.89 USD

  •  Use to properly plumb hydraulic system for longer hose service life
  •  This product cannot be shipped to: CA
  •  Converts female O-ring boss to male pipe
  •  Weight: Approximately: .19 pounds
Texas
Denton
Hydraulic Adapter - 4FP x 4FP x 4FP
Prices start at : 6.49 USD

  •  Use to properly plumb hydraulic systems for longer hose service life
  •  This product cannot be shipped to: CA
  •  Weight: Approximately: .25 pounds
  •  Three female pipe ends
Texas
Denton
Twist Lock Pins
Prices start at : 1.29 USD

  •  1-1/8 in. loop diameter fits on shaft sizes 1/2 in., 9/16 in. & 5/8 in.
  •  Shipping Dimensions: Approximately 4.75 x 2 x 1 inches.
  •  High carbon spring steel
  •  Weight: Approximately: .1 pounds
  •  This product cannot be shipped to: CA
Texas
Denton
1 x 7 Green Vinyl Coated Wire Rope
Prices start at : 0.19 USD

  •  This product cannot be shipped to: CA
  •  1 x 7 wire construction
  •  Weight: Approximately: 4.75 pounds
  •  CALL STORE FOR AVAILABILITY
Texas
Denton
Rotary Kutter 5 Ft. Blade Set
Prices start at : 44.99 USD

  •  Each blade 24 in. wide
  •  Made in the USA
  •  This product cannot be shipped to: CA
  •  For King Kutter 5 ft. Kutter only
Texas
Denton
Gravity Box Auger w/ Hopper
Prices start at : 1589.99 USD

What good is auger with out wagon? Couldn't pas it up...
  •  Hydra Fold's patented way of mounting the auger below the hopper eliminates spilling and waste, resulting in nearly complete clean-out of the hopper
  •  Auger discharge height is adjustable, and swings easily to fill drill hopper
  •  Shipping Dimensions: Approximately 96 x 8 x 8 inches to 170 x 8 x 8 inches depending on size selected. (oversized)
  •  1 in shaft hydraulic motor
  •  This product cannot be shipped to: CA
  •  Finger-tip controls at both the discharge end and the tractor, plus variable delivery speed makes it easy for the operator to fill grain drill or planter boxes without waste or spillage
Texas
Denton
Wheel-Type Rake Tooth - OT-1A
Prices start at : 1.95 USD

  •  This product cannot be shipped to: CA
  •  Model # OT-1A
  •  0.281 (0.77mm) wire
  •  Item measures 21-1/2 in L x 11-1/2 in W
  •  Weight: Approximately: .56 pounds
Texas
Denton
IH Steel Rake Tooth - IH-1A
Prices start at : 1.79 USD

  •  Weight: Approximately: .34 pounds
  •  Fits IH model 15
  •  0.300 wire
  •  Replaces part #457374R1
  •  Shipping Dimensions: Approximately 10.38 x 2.9 x .88 inches.
Texas
Denton
1/2 In. Malleable Guard - Center
Prices start at : 5.49 USD

  •  Replaces FD800
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 7.5 x 2.95 x 2.1 inches.
Texas
Denton
1/4 in National Pipe Thread Grease Fitting - 1 Pk
Prices start at : 1.69 USD

  •  Shipping Dimensions: Approximately 2.88 x 2.88 x .75 inches.
  •  Weight: Approximately: .04 pounds
  •  Includes 1 fitting
  •  Used for lubricating machinery or equipment
Texas
Denton
Hydraulic Adapter - 4MP x 6FPX
Prices start at : 2.89 USD

  •  This product cannot be shipped to: CA
  •  1/4 in. male pipe x 3/8 in. female pipe swivel
  •  Shipping Dimensions: Approximately 4 x 3 x 2 inches.
Texas
Denton
NH Steel Rake Tooth - NH-1
Prices start at : 1.99 USD

  •  Yellow
  •  0.144 wire
  •  9-3/8 in. L x 1-1/16 in. W
  •  Replaces AC part #539754
  •  Fits New Holland model 55 rake - prior to 1951
  •  Shipping Dimensions: Approximately 10.5 x 3 x 1 inches.
Texas
Denton
Standard Spin-On Replacement Fuel Filter Canister
Prices start at : 9.99 USD

  •  Replacement canister for model 595 fuel filter
  •  Part number - 595-5
  •  Shipping Dimensions: Approximately 5.25 x 3.75 x 3.75 inches.
  •  This product cannot be shipped to: CA
Texas
Denton
PTO Locking Device Repair Kit - 21 Spline
Prices start at : 6.49 USD

  •  1-3/8 in.
  •  Made in the USA
  •  Shipping Dimensions: Approximately 4.5 x 2 x .75 inches.
  •  For use with the Weasler 21 spline & hex quick disconnect yokes
  •  Weight: Approximately: .12 pounds
Texas
Denton
Over-Running Clutch
Prices start at : 54.99 USD

  •  Weight: Approximately: 5 to 5.04 pounds depending on selected size
  •  Maximum 1,000 RPM operating speed
  •  1-3/8 in. x 6 male spline
  •  SpeeCo designed & engineered PTO adapter
  •  Choose female spline size of 1-1/8 in. x 6 or 1-3/8 in. x 6
  •  Shipping Dimensions: Approximately 6.5 x 3 x 3 inches.
Texas
Denton