Farm Equipment Swine Equipment For Sale In Worcester

Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model HMC Single Lower Boot Assembly.

Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 90 Single Straight-Out Lower Boot Assembly.

Quantity needed is determined by the size and length of the auger system. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain. Chore-Time Model 75/90/HMC /108 Suspension Kit.

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Chore-Time Model 55 Drop Kit with Clamps. Clamps hold the Drop in place.

With standard 348 RPM power unit. Maximum particle size = 3/16" dia. Maximum moisture content = 18%. Chore-Time Model 90 Flex Auger. I.D. = 1.75" O.D. = 2.71" Delivery Rate = 100 lb./min.

Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638

Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI. Package contains hose, 06654 adapter.

It forces the pigs to come at the nipple Head-On, eliminating nipple side biting & the resulting waste of water that goes directly into your pit. Our Patented Exclusive "Play Guard" will reduce water waste during the act of drinking.

Chore-Time Model 108 45D PVC Elbow

Driver tube is the piece the Flex Auger slides over and attached to. Chore-Time Model 55 Driver Tube. Located at the control unit end of the Flex Auger syystem.

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Does not include plastic upper transition boot. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Quad 30� Lower Boot Assembly.

Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length. Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit.

Chore-Time Replacement 1/4 NPT Pipe Plug. This is the side plug on all Chore-Time Gearheads.

Chore-Time Model 75 Tube Clamp (PVCI)

The state of the art controller will maintain any pre-selected temperature between 68 degrees F and 95 degrees F (20 degrees C and 35 degrees C). The ESU Electronic Temperature Controller is a thermostatic control device that allows you to select and...

Chore-Time Model 75 Tube Connector Only

84.5 watts per side Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved.

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Chore-Time Model 75 45� PVC Elbow

NG Orfice, Burner, for Classic 170/410

Chore-Time Multiflo Auger Connectors (2 per pkg)

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

Maximum moisture content = 18%. Used to convey mash, crumbles or small pellets. I.D. = .89" O.D. = 1.52" Maximum particle size = 3/16" dia. Delivery Rate = 15 lb./min. Chore-Time Multiflo Flex Auger.