108.5 watts per side Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.�...
Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...
Trojan's Cast Aluminum with baked on powder coat finish. Big enough for sows, yet small enough for baby pigs. Stainless-Steel trip plate & housing. All Models use the same tried & proven non-siphoning trouble free 393 valve.
Chore-Time Universal Drop Tube Switch w/Sensor Plus & Safety Timer. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue to operate if the feed...
Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length.
Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 20' - 150' in length. Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit.
Chore-Time Model 55 Twin Auger Boot Weldment Only. This is the lower boot body only. For a complete lower boot use part number CT9314 Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.
Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Chore-Time Single Manual Slide Assembly.
Stainless steel bracket, bolts, nuts, washers & 45 degree elbow. Our Nip-L-Cup allows the pigs to drink from the nipple or from the cup. The cup catches the excess water reducing water waste.
Chore-Time Model 75/90/HMC /108 Suspension Kit. Used to suspend the Flex Auger from the ceiling. Quantity needed is determined by the size and length of the auger system. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain.
Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.
Wrench flats provide ease in installation of theis standard 1/2" connection valve. Designed for use with pigs 50 lbs. 3/4" Bite on Water Supply Trigger. The orfice is adjustable to provide three flow rates.
Chore-Time Model 55 Quad 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle. Does not include plastic upper transition boot.
The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...