Farm Equipment Swine Equipment For Sale In St Petersburg

Chore-Time Model 108 PVC Tubing

Chore-Time Model 75 Tube Clamp (PVCI)

All "Ag " heaters Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple.

G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock.

Chore-Time Model 90/HMC 45� PVC Elbow

For use on the following power Units: CT325966, CT325982, and CT3259124 Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 108 Anchor & Bearing Assembly.

Chore-Time Micro switch for Hopper Level Control.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Chore-Time Model 55 Clear Drop Feeder Assembly. Translucent feeder provides quick visual check of its contents. Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems.

Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube. Chore-Time Model 90/HMC/108 Drop Tube Pin.

This Weldment will accept the M90 Tube. Chore-Time Model 90 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Use with Model 55/75/90 Outlets and CT1932 Drop Tube. Chore-Time Model 55/75/90/HMC Drop Tube Pin.

Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder. Chore-Time Hopper Level Control for single phase power units.

This Weldment will accept the M75 Tube. Chore-Time Model 75 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996. Chore-Time Model 75 Bearing Cap Assembly.

Clamps hold the Drop in place. Chore-Time Model 75 Drop Kit with Clamps.

Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Kane�s polyethylene heat mats installed with�thermostat controls are simply...

Used to convey mash, crumbles or small pellet feeds. Maximum particle size = 5/32" dia. Chore-Time Model 55 Flex Auger. Delivery Rate = 15 lb./min. With standard 348 RPM power unit.

Thermostat, Unit Mount with Bracket, Stainles Steel, (less wiring) Used in all Side Draw Models, (not Guardians)

Includes hardware. Chore-Time Model 75/90 Twin Slide Assembly. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems.

Package contains hose, 06654 adapter. Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI.

Chore-Time Model 108 Tube Connector w/Clamps

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 75 Tube Anchor.

Chore-Time Model 90/HMC Tube Connector w/Clamps