Farm Equipment Swine Equipment For Sale In Savannah

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Chore-Time Model 55 Twin 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly.

Maximum particle size = 5/32" dia. Used to convey mash, crumbles or small pellet feeds. I.D. = 1.44" O.D. = 2.38" Delivery Rate = 50 lb./min. Chore-Time Model 75/HMC Flex Auger. With standard 348 RPM power unit.

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model HMC Model Parts Package. This Weldment will accept the HMC Tube.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

Short anchor tube on this assembly allows for less restriction and more flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Chore-Time Model 75 Tube Connector Only (steel conn/PVC pipe)

This is the auger access door assembly that mounts in the side of a Chore-Time lower boot. Chore-Time Clean-Out Cover Assembly.

Chore-Time Model 108 Tube Connector w/Clamps

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length. Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617

Uses CT6104 Pinion Gear with 1/2 HP and 3/4 HP motors and CT5046 with 1 HP motors. Chore-Time Gearhead Assembly 348 RPM used in Model 75, 90, HMC, 125, & 108 systems.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32615 & CT32617

Motor, Totally Enclosed, Ball Bearing, 1/8 HP, Guardian 100, AW075

Chore-Time Universal Drop Tube Switch w/Sensor Plus & Safety Timer. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue to operate if the feed...

Honeywell Gas Valve, LP Gas, for "K" series or later Pilot Light "Classic" heaters.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Useful as a heat supplement on supply lines under livestock waterers. Works well on plastic or metal pipes in cold weather. After installation on your pipe, simply connect to any 110v electrical supply line or thermostat.

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Fan Wheel, 8" Diameter x 4-7/8, for Classic 115/377/379

This is the toggle switch that is located on the control unit (220v, single phase). Chore-Time DPST Toggle Switch-4 Prong. Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-).

Pilot Assembly with LP Orfice for Classic heaters

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access...

Flame sensor with 40" lead for models AB200, AW230, AW325

The Sensor plus includes a built in heater to dissapate moisture around the sensor. Chore-Time Universal Drop Tube Switch w/Sensor Plus. This helps reduce the build up of dust and dirt on the sensor that can lead to false readings.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')