Farm Equipment Swine Equipment For Sale In Rockford

Chore-Time Model 75 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly.

Used on Flex Auger sysems from 20' - 150' in length. Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615 Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit.

Chore-Time Model 75 Tube Clamp (Steel)

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Trojan cuts no corners on componentry�and that�s important when you have sandy water problems or just tough conditions�Trojan performs better when you need it. Wrench flats provide ease in installation of theis standard 1/2" connection valve.

Chore-Time Model 55 Quad 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle. Does not include plastic upper transition boot.

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

Chore-Time Drop Multiflo Tube Switch w/Sensor Plus. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue to operate if the feed bin runs out of...

Chore-Time Model 55/MF Tube Clamp

Used on Flex Auger sysems from 160' - 250' in length. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit.

Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable. Rounded hand grips on the top and side make for easy handling. Light weight and small, its perfect for younger members of your crew and can easily be manipulated...

Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Clean-Out Cover Assembly. This is the auger access door assembly that mounts in the side of a Chore-Time lower boot.

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

Chore-Time Model 55/75/MF Plastic Drop Tube (3" x 12')

An efficient way to revent freezing. Mount this unit under livestock waterers. An adjustable automatic thermostat permits you to control the temperature for whatever the condition.

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Chore-Time Model 75 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for longer life. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering...

Chore-Time Boot Bearing Assembly. Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots

Chore-Time Universal Drop Tube Switch w/Sensor Plus & Safety Timer. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue to operate if the feed...

Chore-Time Model 55 Clear Drop Feeder Assembly. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Translucent feeder provides quick visual check of its contents.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Chore-Time Model 55/75/90/HMC Drop Tube Pin. Use with Model 55/75/90 Outlets and CT1932 Drop Tube.