46 watts, NRTL, CSA/US approved. Warning: heat radiating appliance for animals - always use a temperature control device - do not cover Kane heat mats with any articles or materials.
Driver tube is the piece the Flex Auger slides over and attached to. Located at the control unit end of the Flex Auger syystem. Chore-Time Model 55 Driver Tube.
Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly.
Adjustable to 3 water flow rates. Outstanding finisher nipple. 360 degree Wrench access, exclusivley a Trojan Patented feature, which means more material at wrench pressure points for a stronger, superior structure.
Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.
Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Kane�s polyethylene heat mats installed with�thermostat controls are simply...
Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot at a 30� angle. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.
Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length. Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617
Perfect for barns, kennels, garages and whelping areas. Just plug your heat mat into the bottom of the control and create a warm, dry environment for your small animals. Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate...
Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Kane�s polyethylene heat mats installed with�thermostat controls are simply...
Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs. All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Aluminum with baked on powder coat finish.
An adjustable automatic thermostat permits you to control the temperature for whatever the condition. Mount this unit under livestock waterers. It runs on LP or convert to natural gas, developing 4050 BTU per hour.
Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.
Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time. Over 30 years of field experience have shown this to be the Injector of choice for most producers.
For a complete lower boot use part number CT36389 or CT 36390 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.
