Farm Equipment Swine Equipment For Sale In Miami

Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access...

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Chore-Time Model 90 Single Straight-Out Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access...

Our Model 2000 Wrench Curve Nipple is standard & it's 45 degree angle keeps the pigs standing while drinking. Stainless steel bracket, bolts, nuts, washers & 45 degree elbow. Our Nip-L-Cup allows the pigs to drink from the nipple or from the cup.

NG Orfice, Burner, for Classic 115/379

Used on CT46800 Control units. Chore-Time Micro Switch for CT46051 Switch Assembly. (Old number CT7114)

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Chore-Time Model 75 PVC Coupler

Chore-Time Model 55 Single Auger Boot Weldment Only. This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

For use on the following power Units: CT325966, CT325982, and CT3259124 Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor.

Delivery Rate = 50 lb./min. Maximum particle size = 5/32" dia. Chore-Time Model 75/HMC Flex Auger. Used to convey mash, crumbles or small pellet feeds. Maximum moisture content = 18%.

This feeder is easy to fill, made of 20 ga. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately...

Chore-Time Flex Auger Anchor Kit

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Chore-Time Model 90 Twin Straight-Out Lower Boot Assembly. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal to the ground. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access...

This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996. Chore-Time Model 75 Bearing Cap Assembly.

It is non-corrosive, self-cleaning with no internal areas for sludge deposits, and threads molded right in for consistency and better sealing. It forces the pigs to come at the nipple Head-On, eliminating nipple side biting & the resulting waste of water...

Also used on Model 108 Anchor & Bearing Assembly Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit.

Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws. Chore-Time Model 75/HMC Driver Weldment Assembly.

Flame sensor for Model AW075

For use on the following power Units: CT325950, CT325951 and CT325977 Chore-Time Model 75/90/HMC 1/2HP, 230V, 1-Phase Replacement Motor.

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube. Chore-Time Model 90/HMC/108 Drop Tube Pin.