Farm Equipment Swine Equipment For Sale In Massachusetts

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.

Chore-Time Model 90 Single Straight-Out Lower Boot Assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground.

Chore-Time Model 55 Quad Auger Boot Weldment Only. For a complete lower boot use part number CT9315 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32615 & CT32617

Chore-Time Model 108 Tube Connector w/Clamps

Chore-Time Model 55 PVC Coupler. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Commonly used when repairing/replacing M55 pvc tubing.

Chore-Time Model 108 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 90/HMC Tube Anchor Weldement.

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.

Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility.

Chore-Time Model HMC Model Parts Package. This Weldment will accept the HMC Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Chore-Time Model 55 Twin 30� Lower Boot Assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle.

Koehn 1/2" x 42" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 55 Tube Anchor.

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable. Light weight and small, its perfect for younger members of your crew and can easily be manipulated with one hand.

Used to convey mash, crumbles or small pellet feeds. Delivery Rate = 50 lb./min. Chore-Time Model 75/HMC Flex Auger. Maximum moisture content = 18%. Maximum particle size = 5/32" dia.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Chore-Time Model 90/HMC Tube Connector w/Clamps

This is the top plug on all Chore-Time Gearheads. Chore-Time Replacment Vent Pipe Plug.

Chore-Time Model 75/90 Twin Slide Assembly. Includes hardware. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems.

Used to convey mash, crumbles or small pellet feeds. Delivery Rate = 15 lb./min. Chore-Time Model 55 Flex Auger. Maximum moisture content = 18%. Maximum particle size = 5/32" dia. I.D. = .89" O.D. = 1.52"

Koehn 1/2" x 48" Original Grip Rattle Paddle without BB's inside to help animals move along alleyways. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility.

The ESU Electronic Temperature Controller is a thermostatic control device that allows you to select and maintain the ideal temperature for all pets and livestock. It also incorporates a unique safety shutoff protector.

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.

It's stainless steel body and trigger won't corrode, the trigger has a built-in playguard and features a slotted filter keeping foreign matter out of the valve. Trojan cuts no corners on componentry�and that�s important when you have sandy water problems...