Farm Equipment Swine Equipment For Sale In Los Angeles

Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325966, CT325982, and CT3259124

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 108 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Used on CT46800 Control units. Chore-Time Micro Switch for CT46051 Switch Assembly. (Old number CT7114)

Chore-Time Model 108 PVC Coupler

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Igniter only, no bracket, for HSI and Guardian heaters, (509201)

Chore-Time Model 55 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Quad 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Sealing ring resists buckling or slipping during installation, and provides a complete 360° seal. Easy to install! Simply drill a 7/8" hole in your barrel, bucket, pipe or stock tank.

Used on Flex Auger sysems from 20' - 150' in length. Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615

Chore-Time Model 55/75/90/108 3/4HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325952, CT325978, CT3259122 and CT3259136

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Chore-Time Model 90/HMC PVC Tubing. Each tube is 10' long.

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Perfect for outdoor pens, kennels, garages, dog houses, whelping areas, veterinary clinics, and barns. They will cause the heat mat to overheat. Made of durable, easy to clean polyethylene, Kane mats provide a safe and consistent heating surface.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

It also features rounded edges to reduce bacteria & scum from building in corners. The cup catches the excess water reducing water waste. Our Nip-L-Cup allows the pigs to drink from the nipple or from the cup.

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Flame sensor with 40" lead for models AB200, AW230, AW325

Chore-Time Model 75 PVC Coupler

Used to convey mash, crumbles or small pellets. Delivery Rate = 15 lb./min. I.D. = .89" O.D. = 1.52" Chore-Time Multiflo Flex Auger. Maximum moisture content = 18%. Maximum particle size = 3/16" dia.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Twin Auger Boot Weldment Only. For a complete lower boot use part number CT9314

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.