Farm Equipment Swine Equipment For Sale In Huntington Beach

Thermostat, Unit Mount with Bracket, Stainles Steel, (less wiring) Used in all Side Draw Models, (not Guardians)

Chore-Time DPST Toggle Switch-4 Prong. Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). This is the toggle switch that is located on the control unit (220v, single phase).

The Trojan long lasting non-corrosive 304 Stainless Steel body & trigger. Slotted filter keeps foreign matter out of the valve. Outstanding finisher nipple. Adjustable to 3 water flow rates.

This is the side plug on all Chore-Time Gearheads. Chore-Time Replacement 1/4 NPT Pipe Plug.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model HMC Single Lower Boot Assembly. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle.

Chore-Time Micro switch for Hopper Level Control.

Used at the end of a Drop Feeding system to control the operation of the power unit. Chore-Time Model 75 Mechanical Drop Feeder Control Unit.

Also used on Model 108 Anchor & Bearing Assembly Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit.

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

Clamps hold the Drop in place. Chore-Time Model 55 Drop Kit with Clamps.

Used on Model 75/90/HMC/108 anchor & bearing assemblies. Chore-Time 5/8" Shaft Collar.

Chore-Time Model 75 Model Parts Package. This Weldment will accept the M75 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Single Auger Boot Weldment Only. This is the lower boot body only.

Chore-Time Model 75 Tube Clamp (PVCI)

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

New improved design, made of molded one-piece plastic, make the new Blue Finisher waterswing better than the stainless waterswing, at a galvanized price. It forces the pigs to come at the nipple Head-On, eliminating nipple side biting & the resulting...

Each tube is 10' long. Chore-Time Model 90/HMC PVC Tubing.

Chore-Time Model 108 Model Parts Package. This Weldment will accept the M108 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

LP Orfice, Burner, for Classic 170/408

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 55 Single 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M55 auger exiting the boot at a 30� angle.

With standard 348 RPM power unit. Used to convey mash, crumbles or small pellet feeds. Maximum moisture content = 18%. I.D. = .89" O.D. = 1.52" Delivery Rate = 15 lb./min. Maximum particle size = 5/32" dia.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Quad Auger Boot Weldment Only. This is the lower boot body only.