Farm Equipment Swine Equipment For Sale In Honolulu

It's stainless steel body and trigger won't corrode, the trigger has a built-in playguard and features a slotted filter keeping foreign matter out of the valve. Trojan cuts no corners on componentry�and that�s important when you have sandy water problems...

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 75 Tube Anchor.

Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots Chore-Time Boot Bearing Assembly.

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal to the ground. Chore-Time Model 90 Twin Straight-Out Lower Boot Assembly.

High Limit Switch, 275-Deg., for "Guardian" models, Switch only

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model HMC Anchor & Bearing Assembly.

Honeywell Gas Valve, LP Gas, for "K" series or later Pilot Light "Classic" heaters.

All "Ag " heaters Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle. Chore-Time Model 55 Twin 30� Lower Boot Assembly.

It forces the pigs to come at the nipple Head-On, eliminating nipple side biting & the resulting waste of water that goes directly into your pit. Wrench flats for easy nipple maintenance and stainless steel grommet won't wear out.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 108 Anchor & Bearing Assembly.

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Chore-Time Model 55 Clear Drop Feeder Assembly.

Perfect for barns, kennels, garages and whelping areas. Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate temperature. Just plug your heat mat into the bottom of the control and create a warm, dry environment for your...

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

For a complete lower boot use part number CT9313 This is the lower boot body only. Chore-Time Model 55 Single Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Quantity needed is determined by the size and length of the auger system. Used to suspend the Flex Auger from the ceiling. Chore-Time Model 75/90/HMC /108 Suspension Kit. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain.

Chore-Time Model 75 Tube Connector Only

This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies. Chore-Time Model 90/HMC Bearing Cap Assembly.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 90/HMC Tube Anchor Weldement.

Use with Model 55/75/90 Outlets and CT1932 Drop Tube. Chore-Time Model 55/75/90/HMC Drop Tube Pin.

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Package contains hose, 06654 adapter. Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot at a 30� angle. Chore-Time Model 75 Single 30� Lower Boot Assembly.

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing.